Honeywell VRN2CDPXA102 Pressure Independent Control Valve with Electric Actuator

Product Description

The Honeywell VRN2CDPXA102 Pressure Independent Control Valve integrates flow and temperature control in various hydronic systems. This valve is essential for maintaining temperature stability as it adjusts to changes in piping pressure. Featuring a built-in pressure control cartridge, it balances flow effectively and is compatible with Honeywell direct-coupled actuators.

Sizes range from one half to three inches with female NPT connections.
Compatible with hot or chilled water, and can handle up to fifty percent glycol solutions.
Includes a differential pressure regulator to maintain a constant pressure drop across the valve seat.
Product Highlights

This valve is engineered for reliable performance in temperature control applications within hydronic systems.

Product Information
Standard Information
Brand: Honeywell
Type: Assembly
Technical Specifications
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1 inch
GPM: 2 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 inches with female NPT fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators; these actuators available factory-installed.
Product DescriptionThe Honeywell VRN2CDPXA102 Pressure Independent Control Valve integrates flow and temperature control in various hydronic systems. This valve is essential for maintaining temperature stability as it adjusts to changes in piping pressure. Featuring a built-in pressure control cartridge, it balances flow effectively and is compatible with Honeywell direct-coupled actuators.
Sizes range from one half to three inches with female NPT connections.
Compatible with hot or chilled water, and can handle up to fifty percent glycol solutions.
Includes a differential pressure regulator to maintain a constant pressure drop across the valve seat.
Product HighlightsThis valve is engineered for reliable performance in temperature control applications within hydronic systems.Product InformationStandard Information

Brand: Honeywell

Type: Assembly
Technical Specifications

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 1 inch

GPM: 2 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 to 3 inches with female NPT fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators; these actuators available factory-installed.

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Pressure Controls
Availability Text: In Stock
Brand: Honeywell
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1 inch
GPM: 2 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 inches with female NPT fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators; these actuators available factory-installed.
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2CDPXA102 - honeywell-vrn2cdpxa102-pressure-independent-control-valve-with-electric-actuator.json.json