HONEYWELL VRN2CDSA1000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CDSA1000 is a pressure independent control valve designed with an electric actuator. This valve operates with a one-inch NPT connection, functions as a two-way valve, and provides a flow rate of two gallons per minute. It has stainless steel trim and is built to sustain a floating on/off control signal. The valve is engineered to fail in place and is suitable for regulating hot or chilled water, including systems with up to fifty percent glycol solutions.

One-inch NPT connection.
Two-way valve supports two gallons per minute flow rate.
Operates with twenty-four VAC.
Product Highlights

This control valve is suitable for HVAC applications where precise flow control is essential. It ensures efficient operation in fluid systems and helps maintain optimal temperature conditions.

Product Information
Standard Information
Manufacturer: Honeywell
Brand: Honeywell
Technical Specifications
MPN: VRN2CDSA1000
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: One inch
Pattern: Two-way
Flow Rate: Two gallons per minute
Trim Material: Stainless Steel
Control Signal: Floating, Two Position
Input Voltage: Twenty-four VAC
Body Style: Two-way ball valve, full port with flow control
Pipe Size: Half inch to three inches with female NPT fittings
Body Pressure Rating: Maximum three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One gallon per minute (half inch valve) to ninety-five gallons per minute (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), and eighteen lb-in (two Nm) for three-quarters inch and one inch up to nine gallons per minute
Product DescriptionThe Honeywell VRN2CDSA1000 is a pressure independent control valve designed with an electric actuator. This valve operates with a one-inch NPT connection, functions as a two-way valve, and provides a flow rate of two gallons per minute. It has stainless steel trim and is built to sustain a floating on/off control signal. The valve is engineered to fail in place and is suitable for regulating hot or chilled water, including systems with up to fifty percent glycol solutions.
One-inch NPT connection.
Two-way valve supports two gallons per minute flow rate.
Operates with twenty-four VAC.
Product HighlightsThis control valve is suitable for HVAC applications where precise flow control is essential. It ensures efficient operation in fluid systems and helps maintain optimal temperature conditions.Product InformationStandard Information

Manufacturer: Honeywell

Brand: Honeywell
Technical Specifications

MPN: VRN2CDSA1000

Valve Type: Dynamic Pressure Regulated Control Valve

Connection: NPT

Size: One inch

Pattern: Two-way

Flow Rate: Two gallons per minute

Trim Material: Stainless Steel

Control Signal: Floating, Two Position

Input Voltage: Twenty-four VAC

Body Style: Two-way ball valve, full port with flow control

Pipe Size: Half inch to three inches with female NPT fittings

Body Pressure Rating: Maximum three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: One gallon per minute (half inch valve) to ninety-five gallons per minute (three inch valve)

Close-off Pressure: One hundred psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), and eighteen lb-in (two Nm) for three-quarters inch and one inch up to nine gallons per minute

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Pressure Gauges
Availability Text: In Stock
Manufacturer: Honeywell
Brand: Honeywell
MPN: VRN2CDSA1000
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: One inch
Pattern: Two-way
Flow Rate: Two gallons per minute
Trim Material: Stainless Steel
Control Signal: Floating, Two Position
Input Voltage: Twenty-four VAC
Body Style: Two-way ball valve, full port with flow control
Pipe Size: Half inch to three inches with female NPT fittings
Body Pressure Rating: Maximum three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One gallon per minute (half inch valve) to ninety-five gallons per minute (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), and eighteen lb-in (two Nm) for three-quarters inch and one inch up to nine gallons per minute
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2CDSA1000 - honeywell-vrn2cdsa1000-pressure-independent-control-valve.json.json