Honeywell VRN2CHSA2000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CHSA2000 is a pressure-independent control valve designed for efficient flow and temperature management in hydronic systems. This valve features a 1-inch NPT connection and has a capacity of six gallons per minute (6 GPM). The valve is equipped with an electric actuator and integrates a pressure control cartridge, which allows for flow balancing even during pressure fluctuations.

Constructed with stainless steel trim for durability.
Operates using a 24 VAC supply voltage.
Compatible with water or glycol solutions up to fifty percent.
Product Highlights

This valve is suitable for maintaining consistent temperature control in heating and cooling systems and is ideal for use in residential and commercial applications.

Product Information
Standard Information
Type: Assembly
Connection: NPT
Technical Specifications
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1 inch
GPM: 6 GPM
Control Signal: Floating, Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 0.5 inches to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions, not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (0.5 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 0.75 inches and 1 inch up to 9 GPM
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2CHSA2000 is a pressure-independent control valve designed for efficient flow and temperature management in hydronic systems. This valve features a 1-inch NPT connection and has a capacity of six gallons per minute (6 GPM). The valve is equipped with an electric actuator and integrates a pressure control cartridge, which allows for flow balancing even during pressure fluctuations.
Constructed with stainless steel trim for durability.
Operates using a 24 VAC supply voltage.
Compatible with water or glycol solutions up to fifty percent.
Product HighlightsThis valve is suitable for maintaining consistent temperature control in heating and cooling systems and is ideal for use in residential and commercial applications.Product InformationStandard Information

Type: Assembly

Connection: NPT
Technical Specifications

Input Voltage: 24 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 1 inch

GPM: 6 GPM

Control Signal: Floating, Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 0.5 inches to 3 inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions, not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (0.5 inch valve) to 95 GPM (3 inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 0.75 inches and 1 inch up to 9 GPM

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Modulating Valves
Availability Text: In Stock
Type: Assembly
Connection: NPT
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1 inch
GPM: 6 GPM
Control Signal: Floating, Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 0.5 inches to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions, not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (0.5 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 0.75 inches and 1 inch up to 9 GPM
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2CHSA2000 - honeywell-vrn2chsa2000-pressure-independent-control-valve.json.json