Honeywell VRN2CHSX7102 Pressure Independent Control Valve with Electric Actuator

Product Description

The Honeywell VRN2CHSX7102 is a pressure-independent control valve designed for hydronic systems. This valve integrates flow and temperature control to maintain consistent temperature during pressure changes. It features an integrated pressure control cartridge that balances and regulates flow efficiently. The valve connects with threaded one-inch FNPT connections and utilizes a Honeywell direct-coupled actuator. Ideal for hot or chilled water systems, this valve accommodates up to fifty percent glycol solutions.

Features a differential pressure regulator, ensuring a constant pressure drop across the valve.
Employs a rolling diaphragm design to provide accurate flow control.
Includes a removable manual operating handle for use during installation or power failure.
Product Highlights

The Honeywell VRN2CHSX7102 valve is essential for maintaining stable flow and temperature in various applications, enhancing system efficiency.

Product Information
Standard Information
Brand: Honeywell
Manufacturer Part Number: VRN2CHSX7102
Technical Specifications
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1 inch
GPM: 6 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Product Description
The Honeywell VRN2CHSX7102 is a pressure-independent control valve designed for hydronic systems. This valve integrates flow and temperature control to maintain consistent temperature during pressure changes. It features an integrated pressure control cartridge that balances and regulates flow efficiently. The valve connects with threaded one-inch FNPT connections and utilizes a Honeywell direct-coupled actuator. Ideal for hot or chilled water systems, this valve accommodates up to fifty percent glycol solutions.
Features a differential pressure regulator, ensuring a constant pressure drop across the valve.
Employs a rolling diaphragm design to provide accurate flow control.
Includes a removable manual operating handle for use during installation or power failure.
Product HighlightsThe Honeywell VRN2CHSX7102 valve is essential for maintaining stable flow and temperature in various applications, enhancing system efficiency.Product InformationStandard Information

Brand: Honeywell

Manufacturer Part Number: VRN2CHSX7102
Technical Specifications

Type: Assembly

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 1 inch

GPM: 6 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches (and 1 inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Pressure Controls
Availability Text: In Stock
Brand: Honeywell
Manufacturer Part Number: VRN2CHSX7102
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1 inch
GPM: 6 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2CHSX7102 - honeywell-vrn2chsx7102-pressure-independent-control-valve-with-electric-actuator.json.json