Honeywell VRN2CMPA3001 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CMPA3001 Pressure Independent Control Valve is designed to integrate flow and temperature regulation in hydronic systems. This valve automatically adjusts flow to maintain temperature even with varying pressure conditions. It comes equipped with an integrated pressure control cartridge for effective flow management.

Two-way valve with a one-inch NPT connection.
Rated for a flow rate of ten GPM.
Includes a modulating fail-in-place electric actuator with a one-meter cable.
Product Highlights

This valve is suitable for both hot and chilled water systems, accommodating glycol solutions up to fifty percent.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2CMPA3001
Technical Specifications
Type: Control Valve
Connection: NPT
Pattern: 2-way
Size: 1 inch
GPM: 10 GPM
Body Material: Forged brass (ASTM B283)
Trim Material: Stainless Steel
Supply Voltage: 24 VAC
Control Signal: Analog
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.
Product Status: Active
Product DescriptionThe Honeywell VRN2CMPA3001 Pressure Independent Control Valve is designed to integrate flow and temperature regulation in hydronic systems. This valve automatically adjusts flow to maintain temperature even with varying pressure conditions. It comes equipped with an integrated pressure control cartridge for effective flow management.
Two-way valve with a one-inch NPT connection.
Rated for a flow rate of ten GPM.
Includes a modulating fail-in-place electric actuator with a one-meter cable.
Product HighlightsThis valve is suitable for both hot and chilled water systems, accommodating glycol solutions up to fifty percent.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2CMPA3001
Technical Specifications

Type: Control Valve

Connection: NPT

Pattern: 2-way

Size: 1 inch

GPM: 10 GPM

Body Material: Forged brass (ASTM B283)

Trim Material: Stainless Steel

Supply Voltage: 24 VAC

Control Signal: Analog

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.

Product Status: Active

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2CMPA3001
Type: Control Valve
Connection: NPT
Pattern: 2-way
Size: 1 inch
GPM: 10 GPM
Body Material: Forged brass (ASTM B283)
Trim Material: Stainless Steel
Supply Voltage: 24 VAC
Control Signal: Analog
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.
Product Status: Active
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2CMPA3001 - honeywell-vrn2cmpa3001-pressure-independent-control-valve.json.json