HONEYWELL VRN2CNPX7100 Pressure Independent Control Valve

Product Description
The Honeywell VRN2CNPX7100 is a pressure independent control valve assembly featuring an electric actuator. This valve is designed for effective flow and temperature control in hydronic systems. It automatically adjusts the flow to keep the temperature consistent, even when piping pressures vary. This product is appropriate for both hot and chilled water applications, handling solutions with up to fifty percent glycol content.
1 inch NPT connection
Two-way valve with a flow rate of 15 GPM
Operates on 24 VAC
Product Highlights
This valve is essential for maintaining system efficiency and stability in varying pressure conditions across HVAC systems.
Product Information
Standard Information
Brand: HONEYWELL
MPN: VRN2CNPX7100
Technical Specifications
Type: Assembly
Connection: NPT
Size: 1 inch
GPM: 15 GPM
Pattern: Two-way
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim Material: Stainless Steel
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Input Voltage: 24 VAC
Control Signal: Two Position
Product DescriptionThe Honeywell VRN2CNPX7100 is a pressure independent control valve assembly featuring an electric actuator. This valve is designed for effective flow and temperature control in hydronic systems. It automatically adjusts the flow to keep the temperature consistent, even when piping pressures vary. This product is appropriate for both hot and chilled water applications, handling solutions with up to fifty percent glycol content.
1 inch NPT connection
Two-way valve with a flow rate of 15 GPM
Operates on 24 VAC

Product HighlightsThis valve is essential for maintaining system efficiency and stability in varying pressure conditions across HVAC systems. Product Information
Standard Information

Brand: HONEYWELL

MPN: VRN2CNPX7100

Technical Specifications

Type: Assembly

Connection: NPT

Size: 1 inch

GPM: 15 GPM

Pattern: Two-way

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim Material: Stainless Steel

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Input Voltage: 24 VAC

Control Signal: Two Position

Product DescriptionThe Honeywell VRN2CNPX7100 is a pressure independent control valve assembly featuring an electric actuator. This valve is designed for effective flow and temperature control in hydronic systems. It automatically adjusts the flow to keep the temperature consistent, even when piping pressures vary. This product is appropriate for both hot and chilled water applications, handling solutions with up to fifty percent glycol content.
1 inch NPT connection
Two-way valve with a flow rate of 15 GPM
Operates on 24 VAC

Product HighlightsThis valve is essential for maintaining system efficiency and stability in varying pressure conditions across HVAC systems. Product Information
Standard Information

Brand: HONEYWELL

MPN: VRN2CNPX7100

Technical Specifications

Type: Assembly

Connection: NPT

Size: 1 inch

GPM: 15 GPM

Pattern: Two-way

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim Material: Stainless Steel

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Input Voltage: 24 VAC

Control Signal: Two Position

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Brand: HONEYWELL
MPN: VRN2CNPX7100
Type: Assembly
Connection: NPT
Size: 1 inch
GPM: 15 GPM
Pattern: Two-way
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim Material: Stainless Steel
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Input Voltage: 24 VAC
Control Signal: Two Position
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2CNPX7100 - honeywell-vrn2cnpx7100-pressure-independent-control-valve.json.json