Honeywell VRN2CPPX5000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CPPX5000 is a pressure-independent control valve designed for integration in hydronic systems. This valve automatically adjusts flow to maintain temperature accuracy during fluctuations in pressure. It features a built-in pressure control cartridge that allows for optimized flow balancing.

Sizes from half an inch to three inches with female NPT connections.
Supports hot or chilled water with glycol solutions up to fifty percent.
Incorporates a differential pressure regulator to maintain a consistent pressure drop.
Product Highlights

This valve is suitable for a variety of applications involving water or glycol solutions, effectively controlling flow and temperature in different environments.

Product Information
Standard Information
Brand: Honeywell
Type: Assembly
Technical Specifications
Connection: NPT
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1 inch
GPM: 20 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: Half an inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three-quarters of an inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators
Product DescriptionThe Honeywell VRN2CPPX5000 is a pressure-independent control valve designed for integration in hydronic systems. This valve automatically adjusts flow to maintain temperature accuracy during fluctuations in pressure. It features a built-in pressure control cartridge that allows for optimized flow balancing.
Sizes from half an inch to three inches with female NPT connections.
Supports hot or chilled water with glycol solutions up to fifty percent.
Incorporates a differential pressure regulator to maintain a consistent pressure drop.
Product HighlightsThis valve is suitable for a variety of applications involving water or glycol solutions, effectively controlling flow and temperature in different environments.Product InformationStandard Information

Brand: Honeywell

Type: Assembly
Technical Specifications

Connection: NPT

Trim Material: Stainless Steel

Pattern: 2-way

Size: 1 inch

GPM: 20 GPM

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: Half an inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)

Close-off Pressure: One hundred psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN20)

Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three-quarters of an inch (and one inch up to nine GPM)

Warranty: One year on valves, five years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Two-Way Unitary Valves
Availability Text: In Stock
Brand: Honeywell
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1 inch
GPM: 20 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: Half an inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three-quarters of an inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2CPPX5000 - honeywell-vrn2cppx5000-pressure-independent-control-valve.json.json