Product Description
The Honeywell VRN2DNPX8200 is a pressure independent control valve with an electric actuator. This valve assembly is suitable for hydronic systems and enables flow and temperature control effectively. It features a pressure control cartridge that ensures balanced flow and precise control.
Valve Size: One and one-quarter inches NPT
Flow Rate: 15 gallons per minute
Designed for hot or chilled water, and glycol solutions up to fifty percent
Product Highlights
This valve is essential for efficient water heating and cooling control in residential and commercial buildings.
Product Information
Standard Information
Brand: Honeywell
Manufacturer Part Number: VRN2DNPX8200
Technical Specifications
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: One and one-quarter inches
GPM: 15 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow
Pipe Size: One-half inch to three inches with female NPT fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three-quarters inches (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators
Product DescriptionThe Honeywell VRN2DNPX8200 is a pressure independent control valve with an electric actuator. This valve assembly is suitable for hydronic systems and enables flow and temperature control effectively. It features a pressure control cartridge that ensures balanced flow and precise control.
Valve Size: One and one-quarter inches NPT
Flow Rate: 15 gallons per minute
Designed for hot or chilled water, and glycol solutions up to fifty percent
Product HighlightsThis valve is essential for efficient water heating and cooling control in residential and commercial buildings.Product InformationStandard Information
Brand: Honeywell
Manufacturer Part Number: VRN2DNPX8200
Technical Specifications
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: One and one-quarter inches
GPM: 15 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow
Pipe Size: One-half inch to three inches with female NPT fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three-quarters inches (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators
Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Brand: Honeywell
Manufacturer Part Number: VRN2DNPX8200
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: One and one-quarter inches
GPM: 15 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow
Pipe Size: One-half inch to three inches with female NPT fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three-quarters inches (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2DNPX8200 - honeywell-vrn2dnpx8200-pressure-independent-control-valve-with-electric-actuator.json.json
| Brand | Honeywell |
|---|---|
| Manufacturer Part Number | VRN2DNPX8200 |
| Type | Assembly |
| Connection | NPT |
| Supply Voltage (Nominal) | 120 VAC, 240 VAC |
| Trim Material | Stainless Steel |
| Pattern | Two-way |
| Size | One and one-quarter inches |
| GPM | 15 GPM |
| Control Signal | Two Position |
| Valve Type | Dynamic Pressure Regulated Control Valve |
| Body Style | Two-way ball valve, straight-through flow |
| Pipe Size | One-half inch to three inches with female NPT fittings |
| Body Pressure Rating (maximum) | 360 psi (2500 kPa) at 250°F (121°C) |
| Controlled Medium | Water or glycol solutions up to fifty percent |
| Medium Temperature Range | -22°C to 250°F (-30°C to 121°C) |
| Maximum Differential Pressure | One GPM (half inch valve) to ninety-five GPM (three inch valve) |
| Close-off Pressure | 100 psid |
| Flow Characteristics | Equal percentage with flow control insert |
| Body | Forged brass (ASTM B283) |
| Flow Optimizer | Laser-milled, glass-reinforced Noryl |
| Trim (ball and stem) | Nickel-chrome plated brass or stainless steel |
| Stem Seals | EPDM O-ring and Teflon bearings |
| Ball Seals | Reinforced Teflon seals with EPDM O-rings |
| Regulator | Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing |
| Compatible Actuators | Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch (DN15 ~ DN20) |
| Minimum Torque Required | 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three-quarters inches (and one inch up to nine GPM) |
| Warranty | One year on valves, five years on actuators |
| Vendor | HONEYWELL |
| Vendor Raw | HONEYWELL |
| SKU | VRN2DNPX8200 |
| Tipo de producto | Valve Actuator Assemblies |
| Disponibilidad | In Stock |
| Moneda | USD |
| Handle Shopify | honeywell-vrn2dnpx8200-pressure-independent-control-valve-with-electric-actuator |
| Shopify Product ID | 9951081988402 |
| Peso | 10 lb |
| Peso gramos | 4536 |
| Tags | AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack |