HONEYWELL VRN2DPPX4000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2DPPX4000 is a pressure independent control valve that integrates an electric actuator. This valve has a one and one-quarter inch NPT connection and supports a flow rate of twenty gallons per minute. It features a plated brass trim and a DCA profile, allowing for effective floating on/off control with fail-in-place capabilities. This valve is perfect for managing hot or chilled water systems that may contain up to fifty percent glycol solutions. It operates on twenty-four volts AC.

Features a one and one-quarter inch NPT connection.
Provides a two-way valve setup with a flow rate of twenty gallons per minute.
Designed for floating on/off control with fail-in-place functionality.
Product Highlights

This valve is engineered for reliable temperature control in hydronic systems.

Product Information
Standard Information
Manufacturer Part Number: VRN2DPPX4000
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Pattern: 2-way
Size: 1-1/4 in
GPM: 20 GPM
Control Signal: Floating, Two Position
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Trim Material: Stainless Steel
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 (DN80); 18 lb-in (2 Nm) up to 3/4 and 1 up to 9 gpm
Close-off Pressure: 100 psid
Maximum Differential Pressure: 1 gpm (1/2 valve) to 95 gpm (3 valve)
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 or 3/4 (DN15 ~ DN 20)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2DPPX4000 is a pressure independent control valve that integrates an electric actuator. This valve has a one and one-quarter inch NPT connection and supports a flow rate of twenty gallons per minute. It features a plated brass trim and a DCA profile, allowing for effective floating on/off control with fail-in-place capabilities. This valve is perfect for managing hot or chilled water systems that may contain up to fifty percent glycol solutions. It operates on twenty-four volts AC.
Features a one and one-quarter inch NPT connection.
Provides a two-way valve setup with a flow rate of twenty gallons per minute.
Designed for floating on/off control with fail-in-place functionality.
Product HighlightsThis valve is engineered for reliable temperature control in hydronic systems.Product InformationStandard Information

Manufacturer Part Number: VRN2DPPX4000

Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Pattern: 2-way

Size: 1-1/4 in

GPM: 20 GPM

Control Signal: Floating, Two Position

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 to 3 with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Trim Material: Stainless Steel

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 (DN80); 18 lb-in (2 Nm) up to 3/4 and 1 up to 9 gpm

Close-off Pressure: 100 psid

Maximum Differential Pressure: 1 gpm (1/2 valve) to 95 gpm (3 valve)

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 or 3/4 (DN15 ~ DN 20)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer Part Number: VRN2DPPX4000
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Pattern: 2-way
Size: 1-1/4 in
GPM: 20 GPM
Control Signal: Floating, Two Position
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Trim Material: Stainless Steel
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 (DN80); 18 lb-in (2 Nm) up to 3/4 and 1 up to 9 gpm
Close-off Pressure: 100 psid
Maximum Differential Pressure: 1 gpm (1/2 valve) to 95 gpm (3 valve)
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 or 3/4 (DN15 ~ DN 20)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2DPPX4000 - honeywell-vrn2dppx4000-pressure-independent-control-valve.json.json