Honeywell VRN2E1SX7100 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2E1SX7100 is a pressure independent control valve and actuator assembly used in closed-loop HVAC systems. This component helps maintain consistent flow of hot or chilled water, effectively handling up to 50% glycol solutions. It stabilizes flow despite pressure changes. The valve integrates a pressure control cartridge for precise flow management. It is compatible with Honeywell direct coupled actuators, and features a durable 2-way ball valve with NPT connections.

Maintains constant flow regardless of pressure fluctuations.
Features a 2-way ball valve with straight-through flow.
Suitable for hot or chilled water with up to 50% glycol solutions.
Product Highlights

Ideal for enhancing HVAC efficiency, this control valve ensures reliable performance in various applications.

Product Information
Standard Information
Manufacturer: Honeywell
MPN: VRN2E1SX7100
Technical Specifications
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1-1/2 inches
Flow Rate: 50 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches (and 1 inches up to 9 GPM)
Product DescriptionThe Honeywell VRN2E1SX7100 is a pressure independent control valve and actuator assembly used in closed-loop HVAC systems. This component helps maintain consistent flow of hot or chilled water, effectively handling up to 50% glycol solutions. It stabilizes flow despite pressure changes. The valve integrates a pressure control cartridge for precise flow management. It is compatible with Honeywell direct coupled actuators, and features a durable 2-way ball valve with NPT connections.
Maintains constant flow regardless of pressure fluctuations.
Features a 2-way ball valve with straight-through flow.
Suitable for hot or chilled water with up to 50% glycol solutions.
Product HighlightsIdeal for enhancing HVAC efficiency, this control valve ensures reliable performance in various applications.Product InformationStandard Information

Manufacturer: Honeywell

MPN: VRN2E1SX7100
Technical Specifications

Type: Assembly

Connection: NPT

Trim Material: Stainless Steel

Pattern: 2-way

Size: 1-1/2 inches

Flow Rate: 50 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches (and 1 inches up to 9 GPM)

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Fan Coil Valves
Availability Text: In Stock
Manufacturer: Honeywell
MPN: VRN2E1SX7100
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1-1/2 inches
Flow Rate: 50 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches (and 1 inches up to 9 GPM)
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2E1SX7100 - honeywell-vrn2e1sx7100-pressure-independent-control-valve-and-actuator-assembly.json.json