Herramientas de Calidad a Bajo Costo
Sugerencias de Producto
Categorías de Tienda

Honeywell VRN2E2SXD000 Pressure Independent Control Valve

MX$42,453.02 Incluye IVA
- Precios sujetos a cambios sin previo aviso.

Informacion Importante

Marca/Fabricante: HONEYWELL

Product Description

The Honeywell VRN2E2SXD000 is a pressure independent control valve designed for hydronic systems. This valve effectively integrates flow and temperature control, managing flow automatically to maintain desired temperatures during pressure changes. It is compatible with Honeywell direct-coupled actuators and is suitable for hot or chilled water, including solutions with up to fifty percent glycol.

NPT connection type
Stainless steel trim
Operates on 24 VAC
Product Highlights

This valve is tailored for use in dynamic pressure regulated systems, making it essential for efficient HVAC operations.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2E2SXD000
Technical Specifications
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Pattern: 2-way
Size: One and a half inches
GPM: Fifty-five gallons per minute
Control Signal: Analog, Floating
Supply Voltage: 24 VAC
Trim Material: Stainless Steel
Body Style: Two-way ball valve, direct flow, full port with patented flow control insert
Pipe Size: One half inch to three inches with female NPT fittings
Body Pressure Rating: Maximum 360 psi (2500 kPa) at 250 degrees Fahrenheit
Controlled Medium: Water or Glycol solutions up to 50%; not for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit
Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at half inch or three quarter inch
Minimum Torque Required: Thirty-five lb-in up to three inches, eighteen lb-in up to three quarters and one inch up to nine GPM
Product DescriptionThe Honeywell VRN2E2SXD000 is a pressure independent control valve designed for hydronic systems. This valve effectively integrates flow and temperature control, managing flow automatically to maintain desired temperatures during pressure changes. It is compatible with Honeywell direct-coupled actuators and is suitable for hot or chilled water, including solutions with up to fifty percent glycol.
NPT connection type
Stainless steel trim
Operates on 24 VAC
Product HighlightsThis valve is tailored for use in dynamic pressure regulated systems, making it essential for efficient HVAC operations.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2E2SXD000
Technical Specifications

Valve Type: Dynamic Pressure Regulated Control Valve

Connection: NPT

Pattern: 2-way

Size: One and a half inches

GPM: Fifty-five gallons per minute

Control Signal: Analog, Floating

Supply Voltage: 24 VAC

Trim Material: Stainless Steel

Body Style: Two-way ball valve, direct flow, full port with patented flow control insert

Pipe Size: One half inch to three inches with female NPT fittings

Body Pressure Rating: Maximum 360 psi (2500 kPa) at 250 degrees Fahrenheit

Controlled Medium: Water or Glycol solutions up to 50%; not for combustible gases, oil or steam

Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit

Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)

Close-off Pressure: One hundred psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at half inch or three quarter inch

Minimum Torque Required: Thirty-five lb-in up to three inches, eighteen lb-in up to three quarters and one inch up to nine GPM

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2E2SXD000
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Pattern: 2-way
Size: One and a half inches
GPM: Fifty-five gallons per minute
Control Signal: Analog, Floating
Supply Voltage: 24 VAC
Trim Material: Stainless Steel
Body Style: Two-way ball valve, direct flow, full port with patented flow control insert
Pipe Size: One half inch to three inches with female NPT fittings
Body Pressure Rating: Maximum 360 psi (2500 kPa) at 250 degrees Fahrenheit
Controlled Medium: Water or Glycol solutions up to 50%; not for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit
Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at half inch or three quarter inch
Minimum Torque Required: Thirty-five lb-in up to three inches, eighteen lb-in up to three quarters and one inch up to nine GPM
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2E2SXD000 - honeywell-vrn2e2sxd000-pressure-independent-control-valve.json.json


Métodos de Pago Aceptados

Información adicional sobre MSI.


Mercado Pago

Precio Regular: $ 0.00

Meses Pago por mes
3 $ 0.00
6 $ 0.00
9 $ 0.00
12 $ 0.00

Agregar una reseña