HONEYWELL VRN2E6PXC000 Dynamic Pressure Regulated Control Valve

Product Description

The Honeywell VRN Series valve, MPN VRN2E6PXC000, is a pressure-regulated control valve for hydronic systems. It adjusts flow to keep temperature stable, adapting to pressure changes automatically. This valve has a built-in pressure control cartridge, which combines flow balancing and regulation. It works with hot or chilled water and glycol solutions up to fifty percent.

Sizes from one-half to three inches with internal NPT connections
Maintains a constant pressure drop across the valve seat
Removable manual operating handle for control during installation or power loss
Product Highlights

The Honeywell VRN2E6PXC000 valve is essential for maintaining stable temperature control within hydronic systems, making it ideal for HVAC professionals.

Product Information
Standard Information
Manufacturer Part Number: VRN2E6PXC000
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Type: Assembly
Connection: NPT
Nominal Supply Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1-1/2 inches
Flow Rate (GPM): 75 GPM
Control Signal: Floating, Two Position
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one-half inch to three inches with female NPT fittings
Maximum Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: one GPM (one-half inch valve) to ninety-five GPM (three-inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body Material: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim: Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators - Non-Spring Return: ML6161, ML7161, MN6105, MN7505
Compatible Actuators - Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarter inch
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three-quarters inch
Product DescriptionThe Honeywell VRN Series valve, MPN VRN2E6PXC000, is a pressure-regulated control valve for hydronic systems. It adjusts flow to keep temperature stable, adapting to pressure changes automatically. This valve has a built-in pressure control cartridge, which combines flow balancing and regulation. It works with hot or chilled water and glycol solutions up to fifty percent.
Sizes from one-half to three inches with internal NPT connections
Maintains a constant pressure drop across the valve seat
Removable manual operating handle for control during installation or power loss
Product HighlightsThe Honeywell VRN2E6PXC000 valve is essential for maintaining stable temperature control within hydronic systems, making it ideal for HVAC professionals.Product InformationStandard Information

Manufacturer Part Number: VRN2E6PXC000

Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications

Type: Assembly

Connection: NPT

Nominal Supply Voltage: 24 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 1-1/2 inches

Flow Rate (GPM): 75 GPM

Control Signal: Floating, Two Position

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: one-half inch to three inches with female NPT fittings

Maximum Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: one GPM (one-half inch valve) to ninety-five GPM (three-inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body Material: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim: Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators - Non-Spring Return: ML6161, ML7161, MN6105, MN7505

Compatible Actuators - Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarter inch

Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three-quarters inch

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Thermostatic Valves
Availability Text: In Stock
Manufacturer Part Number: VRN2E6PXC000
Valve Type: Dynamic Pressure Regulated Control Valve
Type: Assembly
Connection: NPT
Nominal Supply Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1-1/2 inches
Flow Rate (GPM): 75 GPM
Control Signal: Floating, Two Position
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one-half inch to three inches with female NPT fittings
Maximum Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: one GPM (one-half inch valve) to ninety-five GPM (three-inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body Material: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim: Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators - Non-Spring Return: ML6161, ML7161, MN6105, MN7505
Compatible Actuators - Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarter inch
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three-quarters inch
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2E6PXC000 - honeywell-vrn2e6pxc000-dynamic-pressure-regulated-control-valve.json.json