Honeywell VRN2ENPX8102 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2ENPX8102 is a pressure independent control valve and actuator assembly. This two-way valve ensures a stable flow of hot or chilled water, accommodating up to fifty percent glycol solutions in closed-loop HVAC systems, no matter the pressure variations.

Maintains constant flow in HVAC systems despite pressure variations.
Features integrated pressure control for flow balancing.
Compatible with Honeywell direct coupled actuators.
Product Highlights

This valve is designed to provide effective temperature control and flow management in a wide range of HVAC applications.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2ENPX8102
Technical Specifications
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1-1/2 inches
GPM: 15 GPM
Control Signal: Two Position
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 °F (121 °C)
Controlled Medium: Water or glycol solutions up to fifty percent; not for combustible gases, oil, or steam
Medium Temperature Range: -22 °C to 250 °F (-30 °C to 121 °C)
Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches and 1 inches up to 9 GPM
Product DescriptionThe Honeywell VRN2ENPX8102 is a pressure independent control valve and actuator assembly. This two-way valve ensures a stable flow of hot or chilled water, accommodating up to fifty percent glycol solutions in closed-loop HVAC systems, no matter the pressure variations.
Maintains constant flow in HVAC systems despite pressure variations.
Features integrated pressure control for flow balancing.
Compatible with Honeywell direct coupled actuators.
Product HighlightsThis valve is designed to provide effective temperature control and flow management in a wide range of HVAC applications.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2ENPX8102
Technical Specifications

Valve Type: Dynamic Pressure Regulated Control Valve

Connection: NPT

Supply Voltage (Nominal): 120 VAC, 240 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 1-1/2 inches

GPM: 15 GPM

Control Signal: Two Position

Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 °F (121 °C)

Controlled Medium: Water or glycol solutions up to fifty percent; not for combustible gases, oil, or steam

Medium Temperature Range: -22 °C to 250 °F (-30 °C to 121 °C)

Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches and 1 inches up to 9 GPM

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2ENPX8102
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1-1/2 inches
GPM: 15 GPM
Control Signal: Two Position
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 °F (121 °C)
Controlled Medium: Water or glycol solutions up to fifty percent; not for combustible gases, oil, or steam
Medium Temperature Range: -22 °C to 250 °F (-30 °C to 121 °C)
Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches and 1 inches up to 9 GPM
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2ENPX8102 - honeywell-vrn2enpx8102-pressure-independent-control-valve-and-actuator-assembly.json.json