Honeywell VRN2ENPXD000 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2ENPXD000 is a pressure independent control valve assembly designed for efficient flow and temperature management. This valve is suitable for use with hot or chilled water and glycol solutions up to fifty percent concentration. It integrates a pressure control cartridge to ensure accurate flow balancing and is compatible with a variety of heating and cooling systems.

Integrates pressure control for optimal flow balancing
Constructed with forged brass body and stainless steel trim
Operates effectively with 24 VAC power supply
Product Highlights

This valve is essential for maintaining desired temperatures and flow rates in HVAC systems, contributing to energy efficiency and improved performance.

Product Information
Standard Information
Manufacturer: Honeywell
Connection: NPT
Technical Specifications
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1-1/2 inches
GPM: 15 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inches to 3 inches with female NPT fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80); 18 lb-in (2 Nm) up to 3/4 inches (and 1 inches up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2ENPXD000 is a pressure independent control valve assembly designed for efficient flow and temperature management. This valve is suitable for use with hot or chilled water and glycol solutions up to fifty percent concentration. It integrates a pressure control cartridge to ensure accurate flow balancing and is compatible with a variety of heating and cooling systems.
Integrates pressure control for optimal flow balancing
Constructed with forged brass body and stainless steel trim
Operates effectively with 24 VAC power supply
Product HighlightsThis valve is essential for maintaining desired temperatures and flow rates in HVAC systems, contributing to energy efficiency and improved performance.Product InformationStandard Information

Manufacturer: Honeywell

Connection: NPT
Technical Specifications

Supply Voltage (Nominal): 24 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 1-1/2 inches

GPM: 15 GPM

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inches to 3 inches with female NPT fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80); 18 lb-in (2 Nm) up to 3/4 inches (and 1 inches up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer: Honeywell
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1-1/2 inches
GPM: 15 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inches to 3 inches with female NPT fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80); 18 lb-in (2 Nm) up to 3/4 inches (and 1 inches up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2ENPXD000 - honeywell-vrn2enpxd000-pressure-independent-control-valve-assembly.json.json