Honeywell VRN2EPPX5002 Pressure Independent Control Valve

Product Description

The Honeywell VRN Series valve, MPN VRN2EPPX5002, is a pressure-regulated control valve with an electric actuator. This valve is designed for hydronic systems, integrating flow and temperature control effectively. It features a two-way design with a pressure control cartridge for flow balancing, suitable for water and glycol solutions up to fifty percent.

Features a 1-1/2 inch NPT connection.
Designed for systems using up to fifty percent glycol solutions.
Maximum flow rate of twenty gallons per minute.
Product Highlights

The Honeywell VRN2EPPX5002 is essential for maintaining effective flow rates and temperature control in various hydronic systems.

Product Information
Standard Information
Brand: Honeywell
Type: Assembly
Technical Specifications
Connection: NPT
Input Voltage: 24 VAC
Valve Type: Dynamic Pressure Regulated Control Valve
Pattern: Two-way
Size: 1-1/2 inch
Flow Rate: 20 GPM
Control Signal: Analog, Floating
Trim Material: Stainless Steel
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: Negative twenty-two degrees Celsius to 250°F (negative thirty degrees Celsius to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*. Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 to DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN Series valve, MPN VRN2EPPX5002, is a pressure-regulated control valve with an electric actuator. This valve is designed for hydronic systems, integrating flow and temperature control effectively. It features a two-way design with a pressure control cartridge for flow balancing, suitable for water and glycol solutions up to fifty percent.
Features a 1-1/2 inch NPT connection.
Designed for systems using up to fifty percent glycol solutions.
Maximum flow rate of twenty gallons per minute.
Product HighlightsThe Honeywell VRN2EPPX5002 is essential for maintaining effective flow rates and temperature control in various hydronic systems.Product InformationStandard Information

Brand: Honeywell

Type: Assembly
Technical Specifications

Connection: NPT

Input Voltage: 24 VAC

Valve Type: Dynamic Pressure Regulated Control Valve

Pattern: Two-way

Size: 1-1/2 inch

Flow Rate: 20 GPM

Control Signal: Analog, Floating

Trim Material: Stainless Steel

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: Negative twenty-two degrees Celsius to 250°F (negative thirty degrees Celsius to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*. Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 to DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: PRESSURE SWITCHES
Availability Text: In Stock
Brand: Honeywell
Type: Assembly
Connection: NPT
Input Voltage: 24 VAC
Valve Type: Dynamic Pressure Regulated Control Valve
Pattern: Two-way
Size: 1-1/2 inch
Flow Rate: 20 GPM
Control Signal: Analog, Floating
Trim Material: Stainless Steel
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: Negative twenty-two degrees Celsius to 250°F (negative thirty degrees Celsius to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*. Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 to DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2EPPX5002 - honeywell-vrn2eppx5002-pressure-independent-control-valve.json.json