Honeywell VRN2ETPX8102 Pressure Independent Control Valve

Product Description

The Honeywell VRN2ETPX8102 is a pressure independent control valve designed for efficient flow regulation. This two-way valve features a one-and-a-half inch NPT connection and manages a flow rate of up to 40 GPM. It integrates both flow and temperature control in a single unit, operating within a voltage range of one hundred to two hundred fifty VAC. The valve is securely housed in a NEMA 3R enclosure, suitable for various applications.

Features a 1-1/2 inch NPT connection
Operates on 100-250 VAC with fail-open configuration
Includes plated brass trim for enhanced durability
Product Highlights

This valve is ideal for scenarios where precise control over fluid flow and temperature management is necessary, especially in HVAC systems.

Product Information
Standard Information
Manufacturer: Honeywell
Product Status: Active
Technical Specifications
Type: Assembly
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: 1-1/2 inches
GPM: 40 GPM
Control Signal: Two Position
Body Style: Two-way ball valve, straight-through flow
Pipe Size: 1/2 inch to 3 inches
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%
Medium Temperature Range: -22°C to 250°F
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Various models including ML6161, ML7161, and MS series
Minimum Torque Required: 35 lb-in up to 3 inches
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2ETPX8102 is a pressure independent control valve designed for efficient flow regulation. This two-way valve features a one-and-a-half inch NPT connection and manages a flow rate of up to 40 GPM. It integrates both flow and temperature control in a single unit, operating within a voltage range of one hundred to two hundred fifty VAC. The valve is securely housed in a NEMA 3R enclosure, suitable for various applications.
Features a 1-1/2 inch NPT connection
Operates on 100-250 VAC with fail-open configuration
Includes plated brass trim for enhanced durability
Product HighlightsThis valve is ideal for scenarios where precise control over fluid flow and temperature management is necessary, especially in HVAC systems.Product InformationStandard Information

Manufacturer: Honeywell

Product Status: Active
Technical Specifications

Type: Assembly

Valve Type: Dynamic Pressure Regulated Control Valve

Connection: NPT

Supply Voltage (Nominal): 120 VAC, 240 VAC

Trim Material: Stainless Steel

Pattern: Two-way

Size: 1-1/2 inches

GPM: 40 GPM

Control Signal: Two Position

Body Style: Two-way ball valve, straight-through flow

Pipe Size: 1/2 inch to 3 inches

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%

Medium Temperature Range: -22°C to 250°F

Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Various models including ML6161, ML7161, and MS series

Minimum Torque Required: 35 lb-in up to 3 inches

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer: Honeywell
Product Status: Active
Type: Assembly
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: 1-1/2 inches
GPM: 40 GPM
Control Signal: Two Position
Body Style: Two-way ball valve, straight-through flow
Pipe Size: 1/2 inch to 3 inches
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%
Medium Temperature Range: -22°C to 250°F
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Various models including ML6161, ML7161, and MS series
Minimum Torque Required: 35 lb-in up to 3 inches
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2ETPX8102 - honeywell-vrn2etpx8102-pressure-independent-control-valve.json.json