Honeywell VRN2ETSXB100 Pressure Independent Control Valve with Electric Actuator

Product Description

The Honeywell VRN2ETSXB100 is a pressure independent control valve with an electric actuator. This valve assembly is built to enhance flow and temperature regulation in hydronic systems. It automatically adjusts the flow to maintain temperature even when pressure fluctuates. The integrated pressure control cartridge combines flow balancing and control for efficient operation.

Designed for hot or chilled water and glycol solutions up to fifty percent.
Features a two-way valve pattern.
Compatible with Honeywell N05/S05-series direct coupled actuators.
Product Highlights

This product includes a differential pressure regulator ensuring a constant pressure drop.

Product Information
Standard Information
Brand: Honeywell
Type: Assembly
Technical Specifications
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: One and a half inches
GPM: Forty GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One half inch to three inches with female NPT fittings
Body Pressure Rating (maximum): Three hundred sixty psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One GPM (one half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three fourths inch (DN15 ~ DN 20)
Minimum Torque Required: Thirty-five lb-in (4 Nm) up to three inches (DN80), eighteen lb-in (2 Nm) up to three fourths inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators; these actuators available factory-installed.
Product DescriptionThe Honeywell VRN2ETSXB100 is a pressure independent control valve with an electric actuator. This valve assembly is built to enhance flow and temperature regulation in hydronic systems. It automatically adjusts the flow to maintain temperature even when pressure fluctuates. The integrated pressure control cartridge combines flow balancing and control for efficient operation.
Designed for hot or chilled water and glycol solutions up to fifty percent.
Features a two-way valve pattern.
Compatible with Honeywell N05/S05-series direct coupled actuators.
Product HighlightsThis product includes a differential pressure regulator ensuring a constant pressure drop.Product InformationStandard Information

Brand: Honeywell

Type: Assembly
Technical Specifications

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Trim Material: Stainless Steel

Pattern: Two-way

Size: One and a half inches

GPM: Forty GPM

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: One half inch to three inches with female NPT fittings

Body Pressure Rating (maximum): Three hundred sixty psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: One GPM (one half inch valve) to ninety-five GPM (three inch valve)

Close-off Pressure: One hundred psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three fourths inch (DN15 ~ DN 20)

Minimum Torque Required: Thirty-five lb-in (4 Nm) up to three inches (DN80), eighteen lb-in (2 Nm) up to three fourths inch (and one inch up to nine GPM)

Warranty: One year on valves, five years on actuators; these actuators available factory-installed.

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Modulating Valves
Availability Text: In Stock
Brand: Honeywell
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: One and a half inches
GPM: Forty GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One half inch to three inches with female NPT fittings
Body Pressure Rating (maximum): Three hundred sixty psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One GPM (one half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three fourths inch (DN15 ~ DN 20)
Minimum Torque Required: Thirty-five lb-in (4 Nm) up to three inches (DN80), eighteen lb-in (2 Nm) up to three fourths inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators; these actuators available factory-installed.
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2ETSXB100 - honeywell-vrn2etsxb100-pressure-independent-control-valve-with-electric-actuator.json.json