Herramientas de Calidad a Bajo Costo
Sugerencias de Producto
Categorías de Tienda

Honeywell VRN2F1PXA200 Pressure Independent Control Valve

MX$38,384.97 Incluye IVA
- Precios sujetos a cambios sin previo aviso.

Informacion Importante

Marca/Fabricante: HONEYWELL

Product Description
The Honeywell VRN2F1PXA200 is a pressure independent control valve equipped with an electric actuator. This valve comes with a 2-inch NPT connection and supports a flow capacity of 50 GPM. Designed for on/off control, it features a fail-safe closed operation. The valve operates on a 24 VAC power supply and integrates flow and temperature control in one unit.
2-inch NPT connection
Operates at a flow rate of 50 GPM
Compatible with 24 VAC
Product Highlights
This valve effectively manages fluid flow and temperature, ensuring efficient system performance.
Product Information
Standard Information
Brand: Honeywell
Manufacturer: Honeywell
Technical Specifications
MPN: VRN2F1PXA200
Type: Assembly
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: 2 inches
Flow Rate: 50 GPM
Pattern: 2-way
Trim Material: Stainless Steel
Control Signal: Two Position
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators *
Weight: 18 lbs
Unit of Measurement: EA (Each)
Product Status: Active
Product DescriptionThe Honeywell VRN2F1PXA200 is a pressure independent control valve equipped with an electric actuator. This valve comes with a 2-inch NPT connection and supports a flow capacity of 50 GPM. Designed for on/off control, it features a fail-safe closed operation. The valve operates on a 24 VAC power supply and integrates flow and temperature control in one unit.
2-inch NPT connection
Operates at a flow rate of 50 GPM
Compatible with 24 VAC

Product HighlightsThis valve effectively manages fluid flow and temperature, ensuring efficient system performance.Product Information
Standard Information

Brand: Honeywell

Manufacturer: Honeywell

Technical Specifications

MPN: VRN2F1PXA200

Type: Assembly

Valve Type: Dynamic Pressure Regulated Control Valve

Connection: NPT

Size: 2 inches

Flow Rate: 50 GPM

Pattern: 2-way

Trim Material: Stainless Steel

Control Signal: Two Position

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators *

Weight: 18 lbs

Unit of Measurement: EA (Each)

Product Status: Active

Product DescriptionThe Honeywell VRN2F1PXA200 is a pressure independent control valve equipped with an electric actuator. This valve comes with a 2-inch NPT connection and supports a flow capacity of 50 GPM. Designed for on/off control, it features a fail-safe closed operation. The valve operates on a 24 VAC power supply and integrates flow and temperature control in one unit.
2-inch NPT connection
Operates at a flow rate of 50 GPM
Compatible with 24 VAC

Product HighlightsThis valve effectively manages fluid flow and temperature, ensuring efficient system performance.Product Information
Standard Information

Brand: Honeywell

Manufacturer: Honeywell

Technical Specifications

MPN: VRN2F1PXA200

Type: Assembly

Valve Type: Dynamic Pressure Regulated Control Valve

Connection: NPT

Size: 2 inches

Flow Rate: 50 GPM

Pattern: 2-way

Trim Material: Stainless Steel

Control Signal: Two Position

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators *

Weight: 18 lbs

Unit of Measurement: EA (Each)

Product Status: Active

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Modulating Valves
Availability Text: In Stock
Brand: Honeywell
Manufacturer: Honeywell
MPN: VRN2F1PXA200
Type: Assembly
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: 2 inches
Flow Rate: 50 GPM
Pattern: 2-way
Trim Material: Stainless Steel
Control Signal: Two Position
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators *
Weight: 18 lbs
Unit of Measurement: EA (Each)
Product Status: Active
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2F1PXA200 - honeywell-vrn2f1pxa200-pressure-independent-control-valve.json.json


Métodos de Pago Aceptados

Información adicional sobre MSI.


Mercado Pago

Precio Regular: $ 0.00

Meses Pago por mes
3 $ 0.00
6 $ 0.00
9 $ 0.00
12 $ 0.00

Agregar una reseña