Product Description
The Honeywell VRN2F5PX7102 Pressure Independent Control Valve integrates flow and temperature control into a single assembly. This dynamic pressure regulated control valve maintains temperature in hydronic systems, adjusting flow automatically to account for pressure variations.
Includes a direct-coupled electric actuator.
Designed for use with water or glycol solutions.
Forged brass body with stainless steel trim for durability.
Product Highlights
The valve's compact design and efficient performance make it suitable for diverse hydronic heating and cooling systems.
Product Information
Standard Information
Brand: Honeywell
MPN: VRN2F5PX7102
Technical Specifications
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2 inches
Flow Rate: 70 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators, these actuators available factory-installed.
Product DescriptionThe Honeywell VRN2F5PX7102 Pressure Independent Control Valve integrates flow and temperature control into a single assembly. This dynamic pressure regulated control valve maintains temperature in hydronic systems, adjusting flow automatically to account for pressure variations.
Includes a direct-coupled electric actuator.
Designed for use with water or glycol solutions.
Forged brass body with stainless steel trim for durability.
Product HighlightsThe valve's compact design and efficient performance make it suitable for diverse hydronic heating and cooling systems.Product InformationStandard Information
Brand: Honeywell
MPN: VRN2F5PX7102
Technical Specifications
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2 inches
Flow Rate: 70 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators, these actuators available factory-installed.
Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2F5PX7102
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2 inches
Flow Rate: 70 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators, these actuators available factory-installed.
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2F5PX7102 - honeywell-vrn2f5px7102-pressure-independent-control-valve.json.json
| Brand | Honeywell |
|---|---|
| MPN | VRN2F5PX7102 |
| Type | Assembly |
| Connection | NPT |
| Supply Voltage (Nominal) | 24 VAC |
| Trim Material | Stainless Steel |
| Pattern | 2-way |
| Size | 2 inches |
| Flow Rate | 70 GPM |
| Control Signal | Two Position |
| Valve Type | Dynamic Pressure Regulated Control Valve |
| Body Style | Two-way ball valve, straight-through flow, full port with patented flow control insert |
| Pipe Size | 1/2 to 3 inches with female NPT pipe fittings |
| Body Pressure Rating (maximum) | 360 psi (2500 kPa) at 250°F (121°C) |
| Controlled Medium | Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam |
| Medium Temperature Range | -22°F to 250°F (-30°C to 121°C) |
| Maximum Differential Pressure | 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve) |
| Close-off pressure | 100 psid |
| Flow Characteristics | Equal percentage with flow control insert |
| Body | Forged brass (ASTM B283) |
| Flow Optimizer | Laser-milled, glass-reinforced Noryl |
| Stem Seals | EPDM O-ring and Teflon bearings |
| Ball Seals | Reinforced Teflon seals, with EPDM O-rings |
| Regulator | Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing |
| Compatible Actuators | Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20) |
| Minimum Torque Required | 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM) |
| Warranty | 1 year on valves, 5 years on actuators, these actuators available factory-installed. |
| Vendor | HONEYWELL |
| Vendor Raw | HONEYWELL |
| SKU | VRN2F5PX7102 |
| Tipo de producto | Valve Actuators |
| Disponibilidad | In Stock |
| Moneda | USD |
| Handle Shopify | honeywell-vrn2f5px7102-pressure-independent-control-valve |
| Shopify Product ID | 9950858150194 |
| Peso | 10 lb |
| Peso gramos | 4536 |
| Tags | AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack |