HONEYWELL VRN2F6PX9200 Pressure Independent Control Valve

Product Description

The Honeywell VRN2F6PX9200 is a pressure independent control valve used in hydronic systems to integrate flow and temperature control. This valve has a two-inch NPT connection with a flow rate of seventy-five gallons per minute. It includes an electric actuator and plated brass trim, designed for on/off control with a fail-safe closed configuration. The valve works with power ranging from one hundred to two hundred fifty VAC.

Features a two-inch NPT connection with a flow rate of seventy-five gallons per minute.
Designed for on/off control with a fail-safe closed configuration.
Compatible with one hundred to two hundred fifty VAC power.
Product Highlights

The Honeywell VRN2F6PX9200 controls water or glycol solutions effectively while managing flow to maintain temperature even under varying piping pressures.

Product Information
Standard Information
Manufacturer Part Number: VRN2F6PX9200
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Connection: NPT
Pattern: Two-way
Size: 2 in
GPM: 75 GPM
Control Signal: Two Position
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim Material: Stainless Steel
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2F6PX9200 is a pressure independent control valve used in hydronic systems to integrate flow and temperature control. This valve has a two-inch NPT connection with a flow rate of seventy-five gallons per minute. It includes an electric actuator and plated brass trim, designed for on/off control with a fail-safe closed configuration. The valve works with power ranging from one hundred to two hundred fifty VAC.
Features a two-inch NPT connection with a flow rate of seventy-five gallons per minute.
Designed for on/off control with a fail-safe closed configuration.
Compatible with one hundred to two hundred fifty VAC power.
Product HighlightsThe Honeywell VRN2F6PX9200 controls water or glycol solutions effectively while managing flow to maintain temperature even under varying piping pressures.Product InformationStandard Information

Manufacturer Part Number: VRN2F6PX9200

Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications

Connection: NPT

Pattern: Two-way

Size: 2 in

GPM: 75 GPM

Control Signal: Two Position

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim Material: Stainless Steel

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer Part Number: VRN2F6PX9200
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Pattern: Two-way
Size: 2 in
GPM: 75 GPM
Control Signal: Two Position
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim Material: Stainless Steel
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2F6PX9200 - honeywell-vrn2f6px9200-pressure-independent-control-valve.json.json