Honeywell VRN2F6SXA100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2F6SXA100 Pressure Independent Control Valve is designed for efficient flow and temperature control in hydronic systems. This valve maintains optimal temperatures despite fluctuations in piping pressures, making it suitable for a variety of applications.

Available in sizes from one half to three inches with female NPT connections.
Compatible with hot or chilled water and up to fifty percent glycol solutions.
Features a differential pressure regulator ensuring constant pressure drop.
Product Highlights

The Honeywell VRN2F6SXA100 combines automation and precision in one seamless unit, ensuring effective control over water flow in heating and cooling systems.

Product Information
Standard Information
Manufacturer Part Number: VRN2F6SXA100
Type: Control Valve
Technical Specifications
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: 2 inches
GPM: 75 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 degrees Fahrenheit (121 degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: one GPM (one half inch valve) to ninety-five GPM (three inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three fourths inch (DN15 - DN20)
Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80) and eighteen lb-in (two Nm) up to three fourths inch (and one inch up to nine GPM)
Product DescriptionThe Honeywell VRN2F6SXA100 Pressure Independent Control Valve is designed for efficient flow and temperature control in hydronic systems. This valve maintains optimal temperatures despite fluctuations in piping pressures, making it suitable for a variety of applications.
Available in sizes from one half to three inches with female NPT connections.
Compatible with hot or chilled water and up to fifty percent glycol solutions.
Features a differential pressure regulator ensuring constant pressure drop.
Product HighlightsThe Honeywell VRN2F6SXA100 combines automation and precision in one seamless unit, ensuring effective control over water flow in heating and cooling systems.Product InformationStandard Information

Manufacturer Part Number: VRN2F6SXA100

Type: Control Valve
Technical Specifications

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Trim Material: Stainless Steel

Pattern: Two-way

Size: 2 inches

GPM: 75 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: one half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 degrees Fahrenheit (121 degrees Celsius)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: one GPM (one half inch valve) to ninety-five GPM (three inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three fourths inch (DN15 - DN20)

Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80) and eighteen lb-in (two Nm) up to three fourths inch (and one inch up to nine GPM)

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer Part Number: VRN2F6SXA100
Type: Control Valve
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: 2 inches
GPM: 75 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 degrees Fahrenheit (121 degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: one GPM (one half inch valve) to ninety-five GPM (three inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three fourths inch (DN15 - DN20)
Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80) and eighteen lb-in (two Nm) up to three fourths inch (and one inch up to nine GPM)
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2F6SXA100 - honeywell-vrn2f6sxa100-pressure-independent-control-valve.json.json