Herramientas de Calidad a Bajo Costo
Sugerencias de Producto
Categorías de Tienda

HONEYWELL VRN2FRSX7200 Pressure Independent Control Valve Assembly

MX$43,746.48 Incluye IVA
- Precios sujetos a cambios sin previo aviso.

Informacion Importante

Marca/Fabricante: HONEYWELL

Product Description

The Honeywell VRN2FRSX7200 is a pressure independent control valve assembly suitable for HVAC systems. This product ensures a steady flow of hot or chilled water, even with pressure variations, up to fifty percent glycol solutions in closed-loop systems. The integrated pressure control cartridge optimizes flow balancing and control. It features a two-way valve with a two-inch NPT connection and supports a flow rate of thirty gallons per minute.

Maintains constant flow in HVAC systems despite pressure variations.
Features a two-inch NPT connection and thirty GPM flow rate.
Includes a spring return actuator operating on twenty-four VAC.
Product Highlights

The valve supports a variety of applications in HVAC systems, offering reliability and efficiency in flow management.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2FRSX7200
Technical Specifications
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2 inches
GPM: 30 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inches with female NPT fittings
Body Pressure Rating: 360 psi at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to fifty percent; not for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches; 18 lb-in (2 Nm)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2FRSX7200 is a pressure independent control valve assembly suitable for HVAC systems. This product ensures a steady flow of hot or chilled water, even with pressure variations, up to fifty percent glycol solutions in closed-loop systems. The integrated pressure control cartridge optimizes flow balancing and control. It features a two-way valve with a two-inch NPT connection and supports a flow rate of thirty gallons per minute.
Maintains constant flow in HVAC systems despite pressure variations.
Features a two-inch NPT connection and thirty GPM flow rate.
Includes a spring return actuator operating on twenty-four VAC.
Product HighlightsThe valve supports a variety of applications in HVAC systems, offering reliability and efficiency in flow management.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2FRSX7200
Technical Specifications

Type: Assembly

Connection: NPT

Trim Material: Stainless Steel

Pattern: 2-way

Size: 2 inches

GPM: 30 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inches with female NPT fittings

Body Pressure Rating: 360 psi at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to fifty percent; not for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches; 18 lb-in (2 Nm)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2FRSX7200
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2 inches
GPM: 30 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inches with female NPT fittings
Body Pressure Rating: 360 psi at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to fifty percent; not for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches; 18 lb-in (2 Nm)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2FRSX7200 - honeywell-vrn2frsx7200-pressure-independent-control-valve-assembly.json.json


Métodos de Pago Aceptados

Información adicional sobre MSI.


Mercado Pago

Precio Regular: $ 0.00

Meses Pago por mes
3 $ 0.00
6 $ 0.00
9 $ 0.00
12 $ 0.00

Agregar una reseña