Honeywell VRN2FSSX8200 Pressure Regulated Control Valve Assembly

Product Description

The Honeywell VRN2FSSX8200 is a pressure-regulated control valve assembly designed for efficient flow and temperature management. This assembly integrates control for hydronic systems, aiding in temperature maintenance during pressure changes. The valve includes a built-in pressure control cartridge which contributes to flow balancing and regulation.

Available in sizes from one half inch to three inches with female NPT connections.
Compatible with both hot and chilled water systems using up to fifty percent glycol solutions.
Incorporates a differential pressure regulator ensuring a consistent pressure drop across the valve seat.
Product Highlights

This valve is designed for optimal performance in hydronic systems where precise flow control is necessary. It is compatible with standard Honeywell actuators and supports a variety of applications in heating and cooling systems.

Product Information
Standard Information
Type: Assembly
Connection: NPT
Technical Specifications
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2 inch
GPM: 30 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 F (121 C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22 C to 250 F (-30 C to 121 C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80) 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed
Product DescriptionThe Honeywell VRN2FSSX8200 is a pressure-regulated control valve assembly designed for efficient flow and temperature management. This assembly integrates control for hydronic systems, aiding in temperature maintenance during pressure changes. The valve includes a built-in pressure control cartridge which contributes to flow balancing and regulation.
Available in sizes from one half inch to three inches with female NPT connections.
Compatible with both hot and chilled water systems using up to fifty percent glycol solutions.
Incorporates a differential pressure regulator ensuring a consistent pressure drop across the valve seat.
Product HighlightsThis valve is designed for optimal performance in hydronic systems where precise flow control is necessary. It is compatible with standard Honeywell actuators and supports a variety of applications in heating and cooling systems.Product InformationStandard Information

Type: Assembly

Connection: NPT
Technical Specifications

Supply Voltage (Nominal): 120 VAC, 240 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 2 inch

GPM: 30 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 F (121 C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22 C to 250 F (-30 C to 121 C)

Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80) 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)

Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Modulating Valves
Availability Text: In Stock
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2 inch
GPM: 30 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 F (121 C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22 C to 250 F (-30 C to 121 C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80) 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2FSSX8200 - honeywell-vrn2fssx8200-pressure-regulated-control-valve-assembly.json.json