Honeywell VRN2FTPX6200 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2FTPX6200 is a pressure independent control valve assembly. This valve is designed to integrate flow and temperature control. It effectively manages flow in hydronic systems, ensuring consistent temperatures even when there are pressure variations. The valve features an integrated pressure control cartridge, allowing for both flow balancing and precise control. It is compatible with Honeywell direct-coupled actuators and works effectively with hot or chilled water, including solutions with up to fifty percent glycol.

Valve size: two inches NPT connection
Flow rate: forty gallons per minute
Suitable for use with twenty-four VAC supply voltage
Product Highlights

The Honeywell VRN2FTPX6200 is crucial for maintaining system efficiency in heating and cooling applications.

Product Information
Standard Information
Brand: Honeywell
Manufacturer Part Number: VRN2FTPX6200
Technical Specifications
Type: Assembly
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: two inches
Pattern: two-way
GPM: forty gallons per minute
Control Signal: Analog, Floating
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one-half inch to three inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: minus twenty-two degrees Celsius to 250°F (minus thirty degrees Celsius to 121°C)
Maximum Differential Pressure: one gallon per minute (one-half inch valve) to ninety-five gallons per minute (three-inch valve)
Close-off Pressure: one hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Trim Material: Stainless Steel
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim: Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*
Compatible Actuators Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourths inch (DN15 ~ DN 20)
Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-fourths inch (and one inch up to nine gallons per minute)
Warranty: one year on valves, five years on actuators
Product Description
The Honeywell VRN2FTPX6200 is a pressure independent control valve assembly. This valve is designed to integrate flow and temperature control. It effectively manages flow in hydronic systems, ensuring consistent temperatures even when there are pressure variations. The valve features an integrated pressure control cartridge, allowing for both flow balancing and precise control. It is compatible with Honeywell direct-coupled actuators and works effectively with hot or chilled water, including solutions with up to fifty percent glycol.
Valve size: two inches NPT connection
Flow rate: forty gallons per minute
Suitable for use with twenty-four VAC supply voltage
Product HighlightsThe Honeywell VRN2FTPX6200 is crucial for maintaining system efficiency in heating and cooling applications.Product InformationStandard Information

Brand: Honeywell

Manufacturer Part Number: VRN2FTPX6200
Technical Specifications

Type: Assembly

Valve Type: Dynamic Pressure Regulated Control Valve

Connection: NPT

Size: two inches

Pattern: two-way

GPM: forty gallons per minute

Control Signal: Analog, Floating

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: one-half inch to three inches with female NPT pipe fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: minus twenty-two degrees Celsius to 250°F (minus thirty degrees Celsius to 121°C)

Maximum Differential Pressure: one gallon per minute (one-half inch valve) to ninety-five gallons per minute (three-inch valve)

Close-off Pressure: one hundred psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Trim Material: Stainless Steel

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim: Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*

Compatible Actuators Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourths inch (DN15 ~ DN 20)

Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-fourths inch (and one inch up to nine gallons per minute)

Warranty: one year on valves, five years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Thermostatic Valves
Availability Text: In Stock
Brand: Honeywell
Manufacturer Part Number: VRN2FTPX6200
Type: Assembly
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: two inches
Pattern: two-way
GPM: forty gallons per minute
Control Signal: Analog, Floating
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one-half inch to three inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: minus twenty-two degrees Celsius to 250°F (minus thirty degrees Celsius to 121°C)
Maximum Differential Pressure: one gallon per minute (one-half inch valve) to ninety-five gallons per minute (three-inch valve)
Close-off Pressure: one hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Trim Material: Stainless Steel
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim: Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*
Compatible Actuators Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourths inch (DN15 ~ DN 20)
Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-fourths inch (and one inch up to nine gallons per minute)
Warranty: one year on valves, five years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2FTPX6200 - honeywell-vrn2ftpx6200-pressure-independent-control-valve-assembly.json.json