Herramientas de Calidad a Bajo Costo
Sugerencias de Producto
Categorías de Tienda

HONEYWELL VRN2G5PX6202 Pressure Independent Control Valve and Actuator Assembly

MX$46,646.75 Incluye IVA
- Precios sujetos a cambios sin previo aviso.

Informacion Importante

Marca/Fabricante: HONEYWELL

Product Description

The Honeywell VRN2G5PX6202 is a pressure independent control valve and actuator assembly. This two-way valve maintains a constant flow of hot or chilled water, mixed with up to 50 percent glycol, in closed-loop HVAC systems.

Maintains constant flow regardless of pressure fluctuations.
Features a differential pressure regulator.
Suitable for water or glycol solutions up to 50 percent.
Product Highlights

This valve is designed to optimize flow conditions in HVAC settings. Its integrated pressure control cartridge ensures effective flow balancing and temperature regulation.

Product Information
Standard Information
Manufacturer Part Number: VRN2G5PX6202
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2-1/2 inches
GPM: 70 GPM
Control Signal: Analog, Floating
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250 degrees Fahrenheit (121 degrees Celsius)
Controlled Medium: Water or Glycol solutions up to 50 percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22 degrees Fahrenheit to 250 degrees Fahrenheit (-30 degrees Celsius to 121 degrees Celsius)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Product DescriptionThe Honeywell VRN2G5PX6202 is a pressure independent control valve and actuator assembly. This two-way valve maintains a constant flow of hot or chilled water, mixed with up to 50 percent glycol, in closed-loop HVAC systems.
Maintains constant flow regardless of pressure fluctuations.
Features a differential pressure regulator.
Suitable for water or glycol solutions up to 50 percent.
Product HighlightsThis valve is designed to optimize flow conditions in HVAC settings. Its integrated pressure control cartridge ensures effective flow balancing and temperature regulation.Product InformationStandard Information

Manufacturer Part Number: VRN2G5PX6202

Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications

Type: Assembly

Connection: NPT

Trim Material: Stainless Steel

Pattern: 2-way

Size: 2-1/2 inches

GPM: 70 GPM

Control Signal: Analog, Floating

Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250 degrees Fahrenheit (121 degrees Celsius)

Controlled Medium: Water or Glycol solutions up to 50 percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22 degrees Fahrenheit to 250 degrees Fahrenheit (-30 degrees Celsius to 121 degrees Celsius)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer Part Number: VRN2G5PX6202
Valve Type: Dynamic Pressure Regulated Control Valve
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2-1/2 inches
GPM: 70 GPM
Control Signal: Analog, Floating
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250 degrees Fahrenheit (121 degrees Celsius)
Controlled Medium: Water or Glycol solutions up to 50 percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22 degrees Fahrenheit to 250 degrees Fahrenheit (-30 degrees Celsius to 121 degrees Celsius)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2G5PX6202 - honeywell-vrn2g5px6202-pressure-independent-control-valve-and-actuator-assembly.json.json


Métodos de Pago Aceptados

Información adicional sobre MSI.


Mercado Pago

Precio Regular: $ 0.00

Meses Pago por mes
3 $ 0.00
6 $ 0.00
9 $ 0.00
12 $ 0.00

Agregar una reseña