Honeywell VRN2G6SX6202 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2G6SX6202 is a pressure independent control valve and actuator assembly designed for HVAC systems. This two-way valve controls the flow of hot or chilled water mixed with up to fifty percent glycol. It includes a built-in pressure control cartridge to ensure accurate flow balancing and temperature management in hydronic systems.

Maintains a steady temperature by adjusting water flow automatically.
Compatible with Honeywell direct-coupled actuators for ease of installation.
Suitable for piping with pressures that fluctuate.
Product Highlights

This assembly is ideal for closed-loop systems, ensuring optimal performance and reliability.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2G6SX6202
Technical Specifications
Type: Assembly
Connection: NPT
Size: Two and one half inches
GPM: 75 GPM
Pattern: Two-way
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Close-off Pressure: 100 psid
Trim Material: Stainless Steel
Control Signal: Analog, Floating
Input Voltage: 24 VAC
Pipe Size: One half inch to three inches with female NPT pipe fittings
Maximum Differential Pressure: 1 gpm (one half inch valve) to 95 gpm (three inch valve)
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*
Compatible Actuators Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three quarter inch (and one inch up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators
Product Description
The Honeywell VRN2G6SX6202 is a pressure independent control valve and actuator assembly designed for HVAC systems. This two-way valve controls the flow of hot or chilled water mixed with up to fifty percent glycol. It includes a built-in pressure control cartridge to ensure accurate flow balancing and temperature management in hydronic systems.
Maintains a steady temperature by adjusting water flow automatically.
Compatible with Honeywell direct-coupled actuators for ease of installation.
Suitable for piping with pressures that fluctuate.
Product HighlightsThis assembly is ideal for closed-loop systems, ensuring optimal performance and reliability.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2G6SX6202
Technical Specifications

Type: Assembly

Connection: NPT

Size: Two and one half inches

GPM: 75 GPM

Pattern: Two-way

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)

Close-off Pressure: 100 psid

Trim Material: Stainless Steel

Control Signal: Analog, Floating

Input Voltage: 24 VAC

Pipe Size: One half inch to three inches with female NPT pipe fittings

Maximum Differential Pressure: 1 gpm (one half inch valve) to 95 gpm (three inch valve)

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*

Compatible Actuators Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three quarter inch (and one inch up to 9 gpm)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Modulating Valves
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2G6SX6202
Type: Assembly
Connection: NPT
Size: Two and one half inches
GPM: 75 GPM
Pattern: Two-way
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Close-off Pressure: 100 psid
Trim Material: Stainless Steel
Control Signal: Analog, Floating
Input Voltage: 24 VAC
Pipe Size: One half inch to three inches with female NPT pipe fittings
Maximum Differential Pressure: 1 gpm (one half inch valve) to 95 gpm (three inch valve)
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*
Compatible Actuators Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three quarter inch (and one inch up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2G6SX6202 - honeywell-vrn2g6sx6202-pressure-independent-control-valve-and-actuator-assembly.json.json