Honeywell VRN2G8SX7100 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2G8SX7100 is a pressure independent control valve assembly designed for hydronic systems. This valve automatically regulates flow and temperature, providing stability during pressure changes. It is suitable for use with water or glycol solutions up to fifty percent.

Incorporates a two-way ball valve for efficient fluid control.
Made with stainless steel for durability.
Operates with a two-position control signal.
Product Highlights

The Honeywell VRN2G8SX7100 is crafted for optimal performance in dynamic pressure regulation. This valve manages the flow efficiently, ensuring precise temperature maintenance.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2G8SX7100
Technical Specifications
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: Two-way
Size: Two and a half inches
GPM: Eighty-five GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One half inch to three inches with female NPT fittings
Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One GPM (one half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three quarter inch (and one inch up to nine GPM)
Product DescriptionThe Honeywell VRN2G8SX7100 is a pressure independent control valve assembly designed for hydronic systems. This valve automatically regulates flow and temperature, providing stability during pressure changes. It is suitable for use with water or glycol solutions up to fifty percent.
Incorporates a two-way ball valve for efficient fluid control.
Made with stainless steel for durability.
Operates with a two-position control signal.
Product HighlightsThe Honeywell VRN2G8SX7100 is crafted for optimal performance in dynamic pressure regulation. This valve manages the flow efficiently, ensuring precise temperature maintenance.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2G8SX7100
Technical Specifications

Type: Assembly

Connection: NPT

Trim Material: Stainless Steel

Pattern: Two-way

Size: Two and a half inches

GPM: Eighty-five GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: One half inch to three inches with female NPT fittings

Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: One GPM (one half inch valve) to ninety-five GPM (three inch valve)

Close-off Pressure: One hundred psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)

Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three quarter inch (and one inch up to nine GPM)

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2G8SX7100
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: Two-way
Size: Two and a half inches
GPM: Eighty-five GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One half inch to three inches with female NPT fittings
Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One GPM (one half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three quarter inch (and one inch up to nine GPM)
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2G8SX7100 - honeywell-vrn2g8sx7100-pressure-independent-control-valve-assembly.json.json