Honeywell VRN2G8SX8202 Pressure Independent Control Valve

Product Description

The Honeywell VRN2G8SX8202 is a pressure independent control valve designed for hydronic systems. This assembly features a two-and-a-half inch NPT connection and operates effectively with flow rates up to eighty-five gallons per minute. The stainless steel trim ensures durability and longevity in various applications. It adjusts to pressure fluctuations for maintaining temperature control in systems using water or glycol solutions.

Features a two-and-a-half inch NPT connection.
Can handle flow rates up to eighty-five gallons per minute.
Operates on a power supply of one hundred to two hundred fifty VAC.
Product Highlights

This valve is suitable for various hydronic applications, providing reliable performance in controlling fluid flow while adapting to pressure changes.

Product Information
Standard Information
Manufacturer Part Number: VRN2G8SX8202
Type: Assembly
Technical Specifications
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2-1/2 inches
GPM: 85 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Product DescriptionThe Honeywell VRN2G8SX8202 is a pressure independent control valve designed for hydronic systems. This assembly features a two-and-a-half inch NPT connection and operates effectively with flow rates up to eighty-five gallons per minute. The stainless steel trim ensures durability and longevity in various applications. It adjusts to pressure fluctuations for maintaining temperature control in systems using water or glycol solutions.
Features a two-and-a-half inch NPT connection.
Can handle flow rates up to eighty-five gallons per minute.
Operates on a power supply of one hundred to two hundred fifty VAC.
Product HighlightsThis valve is suitable for various hydronic applications, providing reliable performance in controlling fluid flow while adapting to pressure changes.Product InformationStandard Information

Manufacturer Part Number: VRN2G8SX8202

Type: Assembly
Technical Specifications

Connection: NPT

Supply Voltage (Nominal): 120 VAC, 240 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 2-1/2 inches

GPM: 85 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Manufacturer Part Number: VRN2G8SX8202
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2-1/2 inches
GPM: 85 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2G8SX8202 - honeywell-vrn2g8sx8202-pressure-independent-control-valve.json.json