Honeywell VRN2G8SX9200 Dynamic Pressure Regulated Control Valve

Product Description

The Honeywell VRN2G8SX9200 is a dynamic pressure-regulated control valve. This product manages flow in hydronic systems, ensuring temperature stability during pressure variations. Built for compatibility with Honeywell direct-coupled actuators, the valve showcases a two-way ball valve design and features a straight-through flow with a full port design and a flow control insert.

Two-way ball valve with integrated pressure control.
Compatible with hot or chilled water and up to fifty percent glycol solutions.
Includes a differential pressure regulator for consistent pressure management.
Product Highlights

This control valve is designed for effective flow balancing and control in hydronic heating and cooling systems.

Product Information
Standard Information
Manufacturer Part Number: VRN2G8SX9200
Type: Assembly
Technical Specifications
Connection: NPT
Input Voltage: 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: Two and a half inches
GPM: 85 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: Half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at two hundred fifty degrees Fahrenheit (121 degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN 20)
Minimum Torque Required: thirty-five lb-in (4 Nm) up to three inch (DN80), eighteen lb-in (2 Nm) up to three-quarter inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators * These actuators available factory-installed
Product DescriptionThe Honeywell VRN2G8SX9200 is a dynamic pressure-regulated control valve. This product manages flow in hydronic systems, ensuring temperature stability during pressure variations. Built for compatibility with Honeywell direct-coupled actuators, the valve showcases a two-way ball valve design and features a straight-through flow with a full port design and a flow control insert.
Two-way ball valve with integrated pressure control.
Compatible with hot or chilled water and up to fifty percent glycol solutions.
Includes a differential pressure regulator for consistent pressure management.
Product HighlightsThis control valve is designed for effective flow balancing and control in hydronic heating and cooling systems.Product InformationStandard Information

Manufacturer Part Number: VRN2G8SX9200

Type: Assembly
Technical Specifications

Connection: NPT

Input Voltage: 120 VAC, 240 VAC

Trim Material: Stainless Steel

Pattern: Two-way

Size: Two and a half inches

GPM: 85 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: Half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at two hundred fifty degrees Fahrenheit (121 degrees Celsius)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN 20)

Minimum Torque Required: thirty-five lb-in (4 Nm) up to three inch (DN80), eighteen lb-in (2 Nm) up to three-quarter inch (and one inch up to nine GPM)

Warranty: One year on valves, five years on actuators * These actuators available factory-installed

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Manufacturer Part Number: VRN2G8SX9200
Type: Assembly
Connection: NPT
Input Voltage: 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: Two and a half inches
GPM: 85 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: Half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at two hundred fifty degrees Fahrenheit (121 degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN 20)
Minimum Torque Required: thirty-five lb-in (4 Nm) up to three inch (DN80), eighteen lb-in (2 Nm) up to three-quarter inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators * These actuators available factory-installed
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2G8SX9200 - honeywell-vrn2g8sx9200-dynamic-pressure-regulated-control-valve.json.json