Honeywell VRN2GRSX4002 Pressure Independent Control Valve

Product Description

The Honeywell VRN2GRSX4002 is a pressure independent control valve designed for effective management of hydronic systems. This valve features a two-and-a-half inch NPT connection and operates efficiently with a flow rate of thirty gallons per minute. It is equipped with a stainless steel trim and is actuated electrically. This valve utilizes a floating on/off control signal and has fail-in-place capabilities, ensuring reliable operation.

Features a two-and-a-half inch NPT connection.
Designed for a thirty gallons per minute flow rate.
Operates on a twenty-four volt AC supply.
Product Highlights

This valve integrates flow and temperature control to automatically maintain desired conditions in hydronic heating and cooling systems.

Product Information
Standard Information
Manufacturer Part Number: VRN2GRSX4002
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Connection: NPT
Size: 2-1/2 inches
Pattern: 2-way
GPM: 30 GPM
Trim Material: Stainless Steel
Control Signal: Floating, Two Position
Supply Voltage: 24 VAC
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
Product DescriptionThe Honeywell VRN2GRSX4002 is a pressure independent control valve designed for effective management of hydronic systems. This valve features a two-and-a-half inch NPT connection and operates efficiently with a flow rate of thirty gallons per minute. It is equipped with a stainless steel trim and is actuated electrically. This valve utilizes a floating on/off control signal and has fail-in-place capabilities, ensuring reliable operation.
Features a two-and-a-half inch NPT connection.
Designed for a thirty gallons per minute flow rate.
Operates on a twenty-four volt AC supply.
Product HighlightsThis valve integrates flow and temperature control to automatically maintain desired conditions in hydronic heating and cooling systems.Product InformationStandard Information

Manufacturer Part Number: VRN2GRSX4002

Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications

Connection: NPT

Size: 2-1/2 inches

Pattern: 2-way

GPM: 30 GPM

Trim Material: Stainless Steel

Control Signal: Floating, Two Position

Supply Voltage: 24 VAC

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer Part Number: VRN2GRSX4002
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: 2-1/2 inches
Pattern: 2-way
GPM: 30 GPM
Trim Material: Stainless Steel
Control Signal: Floating, Two Position
Supply Voltage: 24 VAC
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2GRSX4002 - honeywell-vrn2grsx4002-pressure-independent-control-valve.json.json