HONEYWELL VRN2GSPXB100 Dynamic Pressure Regulated Control Valve Assembly

Product Description

The HONEYWELL VRN2GSPXB100 is a pressure-regulated control valve assembly designed for efficient flow and temperature management in hydronic systems. It is built to automatically maintain desired temperatures during fluctuations in pressure, ensuring optimal performance. This valve is equipped with an integrated pressure control cartridge for effective flow balancing and control.

Features sizes from one half inch to three inches with female NPT connections.
Compatible with hot or chilled water and can handle up to fifty percent glycol solutions.
Employs a differential pressure regulator to maintain a constant pressure drop.
Product Highlights

The HONEYWELL VRN2GSPXB100 is suitable for a variety of applications, enhancing heating and cooling systems by maintaining accurate control over water and glycol flows.

Product Information
Standard Information
Type: Assembly
Connection: NPT
Technical Specifications
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2-1/2 inches
GPM: 35 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (one half inch valve) to 95 GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three quarter inch (and one inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe HONEYWELL VRN2GSPXB100 is a pressure-regulated control valve assembly designed for efficient flow and temperature management in hydronic systems. It is built to automatically maintain desired temperatures during fluctuations in pressure, ensuring optimal performance. This valve is equipped with an integrated pressure control cartridge for effective flow balancing and control.
Features sizes from one half inch to three inches with female NPT connections.
Compatible with hot or chilled water and can handle up to fifty percent glycol solutions.
Employs a differential pressure regulator to maintain a constant pressure drop.
Product HighlightsThe HONEYWELL VRN2GSPXB100 is suitable for a variety of applications, enhancing heating and cooling systems by maintaining accurate control over water and glycol flows.Product InformationStandard Information

Type: Assembly

Connection: NPT
Technical Specifications

Input Voltage: 24 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 2-1/2 inches

GPM: 35 GPM

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: one half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (one half inch valve) to 95 GPM (three inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three quarter inch (and one inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Pressure Controls
Availability Text: In Stock
Type: Assembly
Connection: NPT
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 2-1/2 inches
GPM: 35 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (one half inch valve) to 95 GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three quarter inch (and one inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2GSPXB100 - honeywell-vrn2gspxb100-dynamic-pressure-regulated-control-valve-assembly.json.json