Honeywell VRN2H2PXC000 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2H2PXC000 is a pressure independent control valve assembly for HVAC systems. This assembly is designed to maintain consistent flow of hot or chilled water in closed-loop systems, even when there are pressure changes. It supports up to fifty percent glycol solutions. The integrated pressure control cartridge is essential for flow balancing and temperature management. The valve is compatible with Honeywell's direct coupled actuators.

Maintains constant flow in HVAC systems despite pressure variations.
Features a differential pressure regulator.
Compatible with Honeywell direct coupled actuators.
Product Highlights

The valve optimizes flow control in heating and cooling applications. Suitable for installation in various HVAC setups, it helps prevent issues related to fluctuating pressures.

Product Information
Standard Information
Manufacturer Part Number: VRN2H2PXC000
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Connection: NPT
Size: 3 inches
GPM: 55 GPM
Control Signal: Floating, Two Position
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed
Product DescriptionThe Honeywell VRN2H2PXC000 is a pressure independent control valve assembly for HVAC systems. This assembly is designed to maintain consistent flow of hot or chilled water in closed-loop systems, even when there are pressure changes. It supports up to fifty percent glycol solutions. The integrated pressure control cartridge is essential for flow balancing and temperature management. The valve is compatible with Honeywell's direct coupled actuators.
Maintains constant flow in HVAC systems despite pressure variations.
Features a differential pressure regulator.
Compatible with Honeywell direct coupled actuators.
Product HighlightsThe valve optimizes flow control in heating and cooling applications. Suitable for installation in various HVAC setups, it helps prevent issues related to fluctuating pressures.Product InformationStandard Information

Manufacturer Part Number: VRN2H2PXC000

Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications

Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert

Connection: NPT

Size: 3 inches

GPM: 55 GPM

Control Signal: Floating, Two Position

Input Voltage: 24 VAC

Trim Material: Stainless Steel

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer Part Number: VRN2H2PXC000
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Connection: NPT
Size: 3 inches
GPM: 55 GPM
Control Signal: Floating, Two Position
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2H2PXC000 - honeywell-vrn2h2pxc000-pressure-independent-control-valve-and-actuator-assembly.json.json