Honeywell VRN2H2SX9102 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2H2SX9102 is a pressure independent control valve and actuator assembly. This product is designed to maintain a constant flow of hot or chilled water in closed-loop HVAC systems. It can also handle up to 50% glycol solutions. The assembly features a three-inch NPT connection and stainless steel trim.

Maintains constant flow regardless of pressure fluctuations.
Includes a built-in differential pressure regulator.
Compatible with Honeywell direct coupled actuators.
Product Highlights

This assembly is ideal for HVAC applications needing precise flow control. It ensures optimal performance in various environmental conditions while providing reliable operation.

Product Information
Standard Information
Manufacturer: Honeywell
Brand: Honeywell
Technical Specifications
MPN: VRN2H2SX9102
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 3 in
Flow Rate: 55 GPM
Control Signal: Two Position
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2inch valve) to 95 GPM (3inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2inch or 3/4inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3inch (DN80), 18 lb-in (2 Nm) up to 3/4inch (and 1inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Weight: 20 lbs
Condition: New
Unit of Measurement: EA (Each)
Production Status: Active
Product DescriptionThe Honeywell VRN2H2SX9102 is a pressure independent control valve and actuator assembly. This product is designed to maintain a constant flow of hot or chilled water in closed-loop HVAC systems. It can also handle up to 50% glycol solutions. The assembly features a three-inch NPT connection and stainless steel trim.
Maintains constant flow regardless of pressure fluctuations.
Includes a built-in differential pressure regulator.
Compatible with Honeywell direct coupled actuators.
Product HighlightsThis assembly is ideal for HVAC applications needing precise flow control. It ensures optimal performance in various environmental conditions while providing reliable operation.Product InformationStandard Information

Manufacturer: Honeywell

Brand: Honeywell
Technical Specifications

MPN: VRN2H2SX9102

Type: Assembly

Connection: NPT

Supply Voltage (Nominal): 120 VAC, 240 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 3 in

Flow Rate: 55 GPM

Control Signal: Two Position

Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 to 3 inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2inch valve) to 95 GPM (3inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2inch or 3/4inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3inch (DN80), 18 lb-in (2 Nm) up to 3/4inch (and 1inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators

Weight: 20 lbs

Condition: New

Unit of Measurement: EA (Each)

Production Status: Active

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Modulating Valves
Availability Text: In Stock
Manufacturer: Honeywell
Brand: Honeywell
MPN: VRN2H2SX9102
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 3 in
Flow Rate: 55 GPM
Control Signal: Two Position
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2inch valve) to 95 GPM (3inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2inch or 3/4inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3inch (DN80), 18 lb-in (2 Nm) up to 3/4inch (and 1inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Weight: 20 lbs
Condition: New
Unit of Measurement: EA (Each)
Production Status: Active
Tags: AI_Content, handling_time_weeks_4, loc_2, Parcel, require-ack
Source file: VRN2H2SX9102 - honeywell-vrn2h2sx9102-pressure-independent-control-valve-and-actuator-assembly.json.json