Honeywell VRN2H4PX7102 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2H4PX7102 is a pressure independent control valve and actuator assembly designed for effective HVAC system operation. This unit maintains a consistent flow of hot or chilled water along with up to fifty percent glycol solutions in closed-loop systems. It effectively adjusts to pressure fluctuations, ensuring reliable performance.

Maintains constant flow regardless of pressure changes.
Equipped with a three-inch NPT connection and a sixty-five GPM flow rate.
Includes a twenty-four volt spring return actuator that is normally open.
Product Highlights

This valve assembly offers improved flow control and is suitable for use with Honeywell direct coupled actuators.

Product Information
Standard Information
Manufacturer: Honeywell
MPN: VRN2H4PX7102
Technical Specifications
Type: Control Valve Assembly
Connection: NPT
Size: 3 inches
GPM: 65 GPM
Supply Voltage (Nominal): 24 VAC
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Body: Forged brass (ASTM B283)
Body Pressure Rating (Maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Trim Material: Stainless Steel
Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3inch (DN80)
Pattern: 2-way
Product DescriptionThe Honeywell VRN2H4PX7102 is a pressure independent control valve and actuator assembly designed for effective HVAC system operation. This unit maintains a consistent flow of hot or chilled water along with up to fifty percent glycol solutions in closed-loop systems. It effectively adjusts to pressure fluctuations, ensuring reliable performance.
Maintains constant flow regardless of pressure changes.
Equipped with a three-inch NPT connection and a sixty-five GPM flow rate.
Includes a twenty-four volt spring return actuator that is normally open.
Product HighlightsThis valve assembly offers improved flow control and is suitable for use with Honeywell direct coupled actuators.Product InformationStandard Information

Manufacturer: Honeywell

MPN: VRN2H4PX7102
Technical Specifications

Type: Control Valve Assembly

Connection: NPT

Size: 3 inches

GPM: 65 GPM

Supply Voltage (Nominal): 24 VAC

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert

Body: Forged brass (ASTM B283)

Body Pressure Rating (Maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Trim Material: Stainless Steel

Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to 3inch (DN80)

Pattern: 2-way

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer: Honeywell
MPN: VRN2H4PX7102
Type: Control Valve Assembly
Connection: NPT
Size: 3 inches
GPM: 65 GPM
Supply Voltage (Nominal): 24 VAC
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
Body: Forged brass (ASTM B283)
Body Pressure Rating (Maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Trim Material: Stainless Steel
Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3inch (DN80)
Pattern: 2-way
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2H4PX7102 - honeywell-vrn2h4px7102-pressure-independent-control-valve-and-actuator-assembly.json.json