Honeywell VRN2H4SX9100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2H4SX9100 is a pressure independent control valve designed for efficient flow management. This three-inch NPT, two-way valve provides reliable operation in hydronic systems by maintaining temperature through precise flow control despite pressure changes. Its durable stainless steel trim and DCA profile enhance its performance.

Features a two-way ball valve that supports straight-through flow with a full port and patented flow control insert.
Suitable for use with water or glycol solutions up to fifty percent concentration.
Equipped with a differential pressure regulator, ensuring a constant pressure drop across the valve seat.
Product Highlights

This valve is essential for maintaining optimal system efficiency and temperature regulation in hydronic applications.

Product Information
Standard Information
Type: Assembly
Connection: NPT
Technical Specifications
Input Voltage: 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: 3 in
GPM: 65 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 in to 3 in with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 in valve) to 95 GPM (3 in valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2H4SX9100 is a pressure independent control valve designed for efficient flow management. This three-inch NPT, two-way valve provides reliable operation in hydronic systems by maintaining temperature through precise flow control despite pressure changes. Its durable stainless steel trim and DCA profile enhance its performance.
Features a two-way ball valve that supports straight-through flow with a full port and patented flow control insert.
Suitable for use with water or glycol solutions up to fifty percent concentration.
Equipped with a differential pressure regulator, ensuring a constant pressure drop across the valve seat.
Product HighlightsThis valve is essential for maintaining optimal system efficiency and temperature regulation in hydronic applications.Product InformationStandard Information

Type: Assembly

Connection: NPT
Technical Specifications

Input Voltage: 120 VAC, 240 VAC

Trim Material: Stainless Steel

Pattern: Two-way

Size: 3 in

GPM: 65 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 in to 3 in with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 in valve) to 95 GPM (3 in valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Discharge Bypass Valves
Availability Text: In Stock
Type: Assembly
Connection: NPT
Input Voltage: 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: 3 in
GPM: 65 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 in to 3 in with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 in valve) to 95 GPM (3 in valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2H4SX9100 - honeywell-vrn2h4sx9100-pressure-independent-control-valve.json.json