HONEYWELL VRN2H5SX9100 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2H5SX9100 is a pressure independent control valve assembly designed for HVAC systems. This assembly ensures a consistent flow of hot or chilled water, accommodating solutions with up to fifty percent glycol in closed-loop systems. It compensates for changes in pressure and features an integrated pressure control cartridge that aids in flow balancing. The unit includes a two-way ball valve with NPT connections and durable stainless steel trim.

Maintains constant flow regardless of pressure fluctuations.
Features a two-way valve with stainless steel trim.
Compatible with hot or chilled water, suitable for up to fifty percent glycol solutions.
Product Highlights

The Honeywell VRN2H5SX9100 is built for reliability in HVAC applications, providing effective control over water flow under various conditions.

Product Information
Standard Information
Brand: Honeywell
Type: Assembly
Technical Specifications
MPN: VRN2H5SX9100
Valve Type: Dynamic pressure regulated control valve
Connection: NPT
Size: 3 inches
GPM: 70 GPM
Pattern: 2-way
Control Signal: Two position
Supply Voltage (Nominal): 120 VAC, 240 VAC
Body Style: 2-way ball valve, straight-through flow, full port with patented flow control insert
Body Pressure Rating (Maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim Material: Stainless steel
Trim (Ball and Stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80); 18 lb-in (2 Nm) up to 3/4 inches (and 1 inch up to 9 GPM)
Compatible Actuators: Non-spring return: ML6161, ML7161, MN6105*, MN7505*; Spring return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.
Product DescriptionThe Honeywell VRN2H5SX9100 is a pressure independent control valve assembly designed for HVAC systems. This assembly ensures a consistent flow of hot or chilled water, accommodating solutions with up to fifty percent glycol in closed-loop systems. It compensates for changes in pressure and features an integrated pressure control cartridge that aids in flow balancing. The unit includes a two-way ball valve with NPT connections and durable stainless steel trim.
Maintains constant flow regardless of pressure fluctuations.
Features a two-way valve with stainless steel trim.
Compatible with hot or chilled water, suitable for up to fifty percent glycol solutions.
Product HighlightsThe Honeywell VRN2H5SX9100 is built for reliability in HVAC applications, providing effective control over water flow under various conditions.Product InformationStandard Information

Brand: Honeywell

Type: Assembly
Technical Specifications

MPN: VRN2H5SX9100

Valve Type: Dynamic pressure regulated control valve

Connection: NPT

Size: 3 inches

GPM: 70 GPM

Pattern: 2-way

Control Signal: Two position

Supply Voltage (Nominal): 120 VAC, 240 VAC

Body Style: 2-way ball valve, straight-through flow, full port with patented flow control insert

Body Pressure Rating (Maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim Material: Stainless steel

Trim (Ball and Stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80); 18 lb-in (2 Nm) up to 3/4 inches (and 1 inch up to 9 GPM)

Compatible Actuators: Non-spring return: ML6161, ML7161, MN6105*, MN7505*; Spring return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Brand: Honeywell
Type: Assembly
MPN: VRN2H5SX9100
Valve Type: Dynamic pressure regulated control valve
Connection: NPT
Size: 3 inches
GPM: 70 GPM
Pattern: 2-way
Control Signal: Two position
Supply Voltage (Nominal): 120 VAC, 240 VAC
Body Style: 2-way ball valve, straight-through flow, full port with patented flow control insert
Body Pressure Rating (Maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim Material: Stainless steel
Trim (Ball and Stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80); 18 lb-in (2 Nm) up to 3/4 inches (and 1 inch up to 9 GPM)
Compatible Actuators: Non-spring return: ML6161, ML7161, MN6105*, MN7505*; Spring return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2H5SX9100 - honeywell-vrn2h5sx9100-pressure-independent-control-valve-and-actuator-assembly.json.json