Honeywell VRN2H9SXA102 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2H9SXA102 is a pressure independent control valve assembly designed for hydronic systems. This product effectively manages flow and temperature, maintaining consistent conditions during pressure fluctuations. It includes a built-in pressure control cartridge for both balancing and control of flow. This valve is compatible with hot or chilled water and glycol solutions, rated up to fifty percent concentration.

Two-way valve design featuring a three-inch NPT connection.
Flow rate of ninety-five gallons per minute with stainless steel trim.
Maximum body pressure rating of three hundred sixty psi at two hundred fifty degrees Fahrenheit.
Product Highlights

This assembly comes with a twenty-four VAC electric actuator and one auxiliary switch, housed in a NEMA 3R enclosure for enhanced protection.

Product Information
Standard Information
Manufacturer Part Number: VRN2H9SXA102
Type: Assembly
Technical Specifications
Connection: NPT
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 3 inches
GPM: 95 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve
Pipe Size: 1/2 inch to 3 inches with female NPT fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2H9SXA102 is a pressure independent control valve assembly designed for hydronic systems. This product effectively manages flow and temperature, maintaining consistent conditions during pressure fluctuations. It includes a built-in pressure control cartridge for both balancing and control of flow. This valve is compatible with hot or chilled water and glycol solutions, rated up to fifty percent concentration.
Two-way valve design featuring a three-inch NPT connection.
Flow rate of ninety-five gallons per minute with stainless steel trim.
Maximum body pressure rating of three hundred sixty psi at two hundred fifty degrees Fahrenheit.
Product HighlightsThis assembly comes with a twenty-four VAC electric actuator and one auxiliary switch, housed in a NEMA 3R enclosure for enhanced protection.Product InformationStandard Information

Manufacturer Part Number: VRN2H9SXA102

Type: Assembly
Technical Specifications

Connection: NPT

Input Voltage: 24 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 3 inches

GPM: 95 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve

Pipe Size: 1/2 inch to 3 inches with female NPT fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to 50%

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Thermostatic Valves
Availability Text: In Stock
Manufacturer Part Number: VRN2H9SXA102
Type: Assembly
Connection: NPT
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 3 inches
GPM: 95 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve
Pipe Size: 1/2 inch to 3 inches with female NPT fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2H9SXA102 - honeywell-vrn2h9sxa102-pressure-independent-control-valve-assembly.json.json