Honeywell VRN2HQPX7202 Pressure Regulated Control Valve Assembly

Product Description

The Honeywell VRN2HQPX7202 is a pressure regulated control valve assembly designed to optimize flow and temperature management in hydronic systems. This valve automatically adjusts to maintain consistent flow during pressure changes, enhancing system performance. It incorporates a pressure control cartridge for effective flow balancing. Featuring compatibility with water or glycol solutions, this valve supports solutions up to fifty percent concentration. It is equipped with a three-inch NPT connection, operates on twenty-four VAC supply voltage, and includes a fail-safe closed configuration as well as NEMA 3R enclosure.

Features a three-inch NPT connection.
Designed for twenty-four VAC supply voltage.
Accommodates water or glycol solutions up to fifty percent.
Product Highlights

This product is essential for HVAC technicians and plumbing professionals managing fluid dynamics in heating systems.

Product Information
Standard Information
Manufacturer Part Number: VRN2HQPX7202
Type: Assembly
Technical Specifications
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 3 in
GPM: 25 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2inch valve) to 95 gpm (3inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2inch or 3/4inch (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3inch (DN80), 18 lb-in (2 Nm) up to 3/4inch (and 1inch up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.
Product DescriptionThe Honeywell VRN2HQPX7202 is a pressure regulated control valve assembly designed to optimize flow and temperature management in hydronic systems. This valve automatically adjusts to maintain consistent flow during pressure changes, enhancing system performance. It incorporates a pressure control cartridge for effective flow balancing. Featuring compatibility with water or glycol solutions, this valve supports solutions up to fifty percent concentration. It is equipped with a three-inch NPT connection, operates on twenty-four VAC supply voltage, and includes a fail-safe closed configuration as well as NEMA 3R enclosure.
Features a three-inch NPT connection.
Designed for twenty-four VAC supply voltage.
Accommodates water or glycol solutions up to fifty percent.
Product HighlightsThis product is essential for HVAC technicians and plumbing professionals managing fluid dynamics in heating systems.Product InformationStandard Information

Manufacturer Part Number: VRN2HQPX7202

Type: Assembly
Technical Specifications

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 3 in

GPM: 25 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 to 3 with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 gpm (1/2inch valve) to 95 gpm (3inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2inch or 3/4inch (DN15 ~ DN 20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3inch (DN80), 18 lb-in (2 Nm) up to 3/4inch (and 1inch up to 9 gpm)

Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Manufacturer Part Number: VRN2HQPX7202
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 3 in
GPM: 25 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2inch valve) to 95 gpm (3inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2inch or 3/4inch (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3inch (DN80), 18 lb-in (2 Nm) up to 3/4inch (and 1inch up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2HQPX7202 - honeywell-vrn2hqpx7202-pressure-regulated-control-valve-assembly.json.json