Honeywell VRN2HRPX7102 Pressure Independent Control Valve

Product Description

The Honeywell VRN2HRPX7102 is a pressure independent control valve that enables efficient flow and temperature management in hydronic systems. This valve is designed to automatically adjust flow to maintain the desired temperature, even when pressure variations occur in the piping. It includes an integrated pressure control cartridge that balances flow seamlessly.

Features a three-inch NPT connection.
Designed for a flow rate of thirty gallons per minute.
Operates on a twenty-four VAC supply voltage.
Product Highlights

This valve is suitable for both hot and chilled water systems, even with up to fifty percent glycol solutions.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2HRPX7102
Technical Specifications
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: 3 inches
GPM: 30 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi at 250°F
Controlled Medium: Water or Glycol solutions up to 50%
Medium Temperature Range: -22°C to 250°F
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105
Minimum Torque Required: 35 lb-in up to 3 inches
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2HRPX7102 is a pressure independent control valve that enables efficient flow and temperature management in hydronic systems. This valve is designed to automatically adjust flow to maintain the desired temperature, even when pressure variations occur in the piping. It includes an integrated pressure control cartridge that balances flow seamlessly.
Features a three-inch NPT connection.
Designed for a flow rate of thirty gallons per minute.
Operates on a twenty-four VAC supply voltage.
Product HighlightsThis valve is suitable for both hot and chilled water systems, even with up to fifty percent glycol solutions.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2HRPX7102
Technical Specifications

Type: Assembly

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Trim Material: Stainless Steel

Pattern: Two-way

Size: 3 inches

GPM: 30 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi at 250°F

Controlled Medium: Water or Glycol solutions up to 50%

Medium Temperature Range: -22°C to 250°F

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105

Minimum Torque Required: 35 lb-in up to 3 inches

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2HRPX7102
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: 3 inches
GPM: 30 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi at 250°F
Controlled Medium: Water or Glycol solutions up to 50%
Medium Temperature Range: -22°C to 250°F
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105
Minimum Torque Required: 35 lb-in up to 3 inches
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2HRPX7102 - honeywell-vrn2hrpx7102-pressure-independent-control-valve.json.json