Product Description
The Honeywell VRN2HSPX6100 is a pressure independent control valve and actuator assembly made for HVAC applications. This assembly keeps a stable flow of hot or chilled water, even with up to fifty percent glycol solutions, in closed-loop systems. It compensates for pressure changes, ensuring optimal performance. The integrated pressure control cartridge allows flow balancing while the differential pressure regulator makes sure that fluid flow remains unaffected by supply pressure changes.
Maintains constant flow regardless of pressure fluctuations.
Features an integrated pressure control cartridge.
Compatible with Honeywell direct coupled actuators.
Product Highlights
This valve assembly is built to enhance flow consistency and control in HVAC systems, facilitating effective temperature management.
Product Information
Standard Information
Manufacturer Part Number: VRN2HSPX6100
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Connection: NPT
Pattern: 2-way
Size: 3 inches
GPM: 35 GPM
Control Signal: Analog, Floating
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Trim Material: Stainless Steel
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches, 18 lb-in (2 Nm) up to 3/4 inch
Product DescriptionThe Honeywell VRN2HSPX6100 is a pressure independent control valve and actuator assembly made for HVAC applications. This assembly keeps a stable flow of hot or chilled water, even with up to fifty percent glycol solutions, in closed-loop systems. It compensates for pressure changes, ensuring optimal performance. The integrated pressure control cartridge allows flow balancing while the differential pressure regulator makes sure that fluid flow remains unaffected by supply pressure changes.
Maintains constant flow regardless of pressure fluctuations.
Features an integrated pressure control cartridge.
Compatible with Honeywell direct coupled actuators.
Product HighlightsThis valve assembly is built to enhance flow consistency and control in HVAC systems, facilitating effective temperature management.Product InformationStandard Information
Manufacturer Part Number: VRN2HSPX6100
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Connection: NPT
Pattern: 2-way
Size: 3 inches
GPM: 35 GPM
Control Signal: Analog, Floating
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Trim Material: Stainless Steel
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches, 18 lb-in (2 Nm) up to 3/4 inch
Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer Part Number: VRN2HSPX6100
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Pattern: 2-way
Size: 3 inches
GPM: 35 GPM
Control Signal: Analog, Floating
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Trim Material: Stainless Steel
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches, 18 lb-in (2 Nm) up to 3/4 inch
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2HSPX6100 - honeywell-vrn2hspx6100-pressure-independent-control-valve-and-actuator-assembly.json.json
| Manufacturer Part Number | VRN2HSPX6100 |
|---|---|
| Valve Type | Dynamic Pressure Regulated Control Valve |
| Connection | NPT |
| Pattern | 2-way |
| Size | 3 inches |
| GPM | 35 GPM |
| Control Signal | Analog, Floating |
| Body Style | Two-way ball valve, straight-through flow, full port with patented flow control insert |
| Pipe Size | 1/2 inch to 3 inch with female NPT pipe fittings |
| Body Pressure Rating | 360 psi (2500 kPa) at 250°F (121°C) |
| Controlled Medium | Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam |
| Medium Temperature Range | -22°F to 250°F (-30°C to 121°C) |
| Maximum Differential Pressure | 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve) |
| Close-off Pressure | 100 psid |
| Flow Characteristics | Equal percentage with flow control insert |
| Body | Forged brass (ASTM B283) |
| Trim Material | Stainless Steel |
| Flow Optimizer | Laser-milled, glass-reinforced Noryl |
| Trim (ball and stem) | Nickel-chrome plated brass, or stainless steel |
| Stem Seals | EPDM O-ring and Teflon bearings |
| Ball Seals | Reinforced Teflon seals, with EPDM O-rings |
| Regulator | Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing |
| Compatible Actuators | Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch |
| Minimum Torque Required | 35 lb-in (4 Nm) up to 3 inches, 18 lb-in (2 Nm) up to 3/4 inch |
| Vendor | HONEYWELL |
| Vendor Raw | HONEYWELL |
| SKU | VRN2HSPX6100 |
| Tipo de producto | Valve Actuators |
| Disponibilidad | In Stock |
| Moneda | USD |
| Handle Shopify | honeywell-vrn2hspx6100-pressure-independent-control-valve-and-actuator-assembly |
| Shopify Product ID | 9951405539634 |
| Peso | 15 lb |
| Peso gramos | 6804 |
| Tags | AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack |