Honeywell VRN2HSSX8102 Pressure Independent Control Valve

Product Description

The Honeywell VRN2HSSX8102 is a pressure independent control valve that integrates flow and temperature control in hydronic systems. This valve features a three-inch NPT connection and operates automatically to regulate flow based on piping pressure changes.

2-way valve with patented flow control insert.
Compatible with Honeywell N05/S05-series direct coupled actuators.
Includes a differential pressure regulator for consistent pressure across the valve seat.
Product Highlights

The Honeywell VRN2HSSX8102 is designed for reliable operation in water or glycol systems up to fifty percent strength. It is built with stainless steel trim and operates within a NEMA 3R enclosure, with a voltage range of one hundred to two hundred fifty VAC.

Product Information
Standard Information
Manufacturer Part Number: VRN2HSSX8102
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Connection: NPT
Pattern: 2-way
Size: 3 in
GPM: 35 GPM
Trim Material: Stainless Steel
Supply Voltage (Nominal): 120 VAC, 240 VAC
Control Signal: Two Position
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 in to 3 in with female NPT fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 in) to 95 gpm (3 in)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2HSSX8102 is a pressure independent control valve that integrates flow and temperature control in hydronic systems. This valve features a three-inch NPT connection and operates automatically to regulate flow based on piping pressure changes.
2-way valve with patented flow control insert.
Compatible with Honeywell N05/S05-series direct coupled actuators.
Includes a differential pressure regulator for consistent pressure across the valve seat.
Product HighlightsThe Honeywell VRN2HSSX8102 is designed for reliable operation in water or glycol systems up to fifty percent strength. It is built with stainless steel trim and operates within a NEMA 3R enclosure, with a voltage range of one hundred to two hundred fifty VAC.Product InformationStandard Information

Manufacturer Part Number: VRN2HSSX8102

Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications

Connection: NPT

Pattern: 2-way

Size: 3 in

GPM: 35 GPM

Trim Material: Stainless Steel

Supply Voltage (Nominal): 120 VAC, 240 VAC

Control Signal: Two Position

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 in to 3 in with female NPT fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 gpm (1/2 in) to 95 gpm (3 in)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 gpm)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Manufacturer Part Number: VRN2HSSX8102
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Pattern: 2-way
Size: 3 in
GPM: 35 GPM
Trim Material: Stainless Steel
Supply Voltage (Nominal): 120 VAC, 240 VAC
Control Signal: Two Position
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 in to 3 in with female NPT fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 in) to 95 gpm (3 in)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2HSSX8102 - honeywell-vrn2hssx8102-pressure-independent-control-valve.json.json