Herramientas de Calidad a Bajo Costo
Sugerencias de Producto
Categorías de Tienda

Honeywell VRN2HSSXA100 VRN Series Pressure Regulated Control Valve

MX$55,950.03 Incluye IVA
- Precios sujetos a cambios sin previo aviso.

Informacion Importante

Marca/Fabricante: HONEYWELL

Product Description

The Honeywell VRN2HSSXA100 is a pressure-regulated control valve designed for efficient flow and temperature management in hydronic systems. This valve automatically adjusts to maintain consistent temperature levels when piping pressures change. It incorporates a built-in pressure control cartridge for effective flow balancing.

Compatible with hot or chilled water, including 50% glycol solutions.
Available in sizes from half an inch to three inches with female NPT connections.
Features a patented flow control insert for equal percentage flow characteristics.
Product Highlights

The Honeywell VRN2HSSXA100 valve provides seamless integration for hydronic heating and cooling applications.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2HSSXA100
Technical Specifications
Type: Assembly
Connection: NPT
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Valve Pattern: 2-way
Size: 3 inches
Flow Rate: 35 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 inches with female NPT fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body Material: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim: Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Product DescriptionThe Honeywell VRN2HSSXA100 is a pressure-regulated control valve designed for efficient flow and temperature management in hydronic systems. This valve automatically adjusts to maintain consistent temperature levels when piping pressures change. It incorporates a built-in pressure control cartridge for effective flow balancing.
Compatible with hot or chilled water, including 50% glycol solutions.
Available in sizes from half an inch to three inches with female NPT connections.
Features a patented flow control insert for equal percentage flow characteristics.
Product HighlightsThe Honeywell VRN2HSSXA100 valve provides seamless integration for hydronic heating and cooling applications.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2HSSXA100
Technical Specifications

Type: Assembly

Connection: NPT

Input Voltage: 24 VAC

Trim Material: Stainless Steel

Valve Pattern: 2-way

Size: 3 inches

Flow Rate: 35 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 to 3 inches with female NPT fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body Material: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim: Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Pressure Controls
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2HSSXA100
Type: Assembly
Connection: NPT
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Valve Pattern: 2-way
Size: 3 inches
Flow Rate: 35 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 to 3 inches with female NPT fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body Material: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim: Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2HSSXA100 - honeywell-vrn2hssxa100-vrn-series-pressure-regulated-control-valve.json.json


Métodos de Pago Aceptados

Información adicional sobre MSI.


Mercado Pago

Precio Regular: $ 0.00

Meses Pago por mes
3 $ 0.00
6 $ 0.00
9 $ 0.00
12 $ 0.00

Agregar una reseña