Herramientas de Calidad a Bajo Costo
Sugerencias de Producto
Categorías de Tienda

Honeywell VRN2HUPX0000 Pressure Independent Control Valve

MX$33,622.69 Incluye IVA
- Precios sujetos a cambios sin previo aviso.

Informacion Importante

Marca/Fabricante: HONEYWELL

Product Description

The Honeywell VRN2HUPX0000 is a pressure-independent control valve designed for hydronic systems. This valve manages flow and temperature simultaneously, adapting to pressure variations automatically. It supports temperature maintenance during system fluctuations, ensuring optimal performance.

Valve sizes range from one half inch to three inches with female NPT connections.
Compatible with hot or chilled water, including up to fifty percent glycol blends.
Incorporates a differential pressure regulator for consistent pressure management.
Product Highlights

The Honeywell VRN2HUPX0000 provides reliable flow control in hydronic applications.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2HUPX0000
Technical Specifications
Type: Valve Only
Connection: NPT
Trim Material: Brass
Pattern: 2-way
Size: 3 inches
GPM: 45 GPM
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one half inch to three inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: one GPM (one half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim: Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three quarters inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators
Product Description
The Honeywell VRN2HUPX0000 is a pressure-independent control valve designed for hydronic systems. This valve manages flow and temperature simultaneously, adapting to pressure variations automatically. It supports temperature maintenance during system fluctuations, ensuring optimal performance.
Valve sizes range from one half inch to three inches with female NPT connections.
Compatible with hot or chilled water, including up to fifty percent glycol blends.
Incorporates a differential pressure regulator for consistent pressure management.
Product HighlightsThe Honeywell VRN2HUPX0000 provides reliable flow control in hydronic applications.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2HUPX0000
Technical Specifications

Type: Valve Only

Connection: NPT

Trim Material: Brass

Pattern: 2-way

Size: 3 inches

GPM: 45 GPM

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: one half inch to three inches with female NPT pipe fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: one GPM (one half inch valve) to ninety-five GPM (three inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim: Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three quarters inch (and one inch up to nine GPM)

Warranty: One year on valves, five years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2HUPX0000
Type: Valve Only
Connection: NPT
Trim Material: Brass
Pattern: 2-way
Size: 3 inches
GPM: 45 GPM
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one half inch to three inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: one GPM (one half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim: Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three quarters inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2HUPX0000 - honeywell-vrn2hupx0000-pressure-independent-control-valve.json.json


Métodos de Pago Aceptados

Información adicional sobre MSI.


Mercado Pago

Precio Regular: $ 0.00

Meses Pago por mes
3 $ 0.00
6 $ 0.00
9 $ 0.00
12 $ 0.00

Agregar una reseña