Indexable Square Shoulder End Mill, Max. Cutting Dia. 25 mm, Shank Dia. 25.00 mm, Weldon Flat, Overall Length 100.00 mm, ANSI Code F4042R.W25.025.Z04.10, Compatible Hardware FS1454 T8IP Clamping Screw, Coolant Fed Coolant Through
| Item | Indexable Square Shoulder End Mill |
|---|---|
| Cutter Dia. | 0.984 in |
| Series | F4042R |
| Depth of Cut | 10 mm |
| Number of Inserts | 4 |
| Shank Dia. (In.) | 0.984 |
| Overall Length (In.) | 3.937 |
| Diameter | 0.984 in |
| Number of Inserts Required | 4 |
| Cutting Edge Type | Carbide |
| Left/Right Hand | Right |
| Insert Screw | FS1454 Torx 8 IP |
| Cutting Length | 0.394 in |
| Material | All ISO |
| Nomenclature | F4042R.W25.025.Z04.10 |
| Overall Length | 100 mm |
| Max. Speed | 31,700 rpm |
| Shank Type - Machining | Weldon Flat |
| ANSI Code | F4042R.W25.025.Z04.10 |
| Insert Cutting Edge Length | 10 mm |
| Head Projection Length | 30 mm |
| ISO Number | F4042R.W25.025.Z04.10 |
| Number of Coolant Holes | 2 |
| Min. Cutting Dia. | 25 mm |
| Cutting Application | Circular Interpolation Milling, Pocket Milling, Ramping, Shoulder Milling (Finishing), Shoulder Milling (Roughing) |
| Standards | DIN1835-B |
| Compatible Hardware | FS1454 T8IP Clamping Screw |
| Coolant Fed | Coolant Through |
| Features | 2 Cutting Edges per Indexable Insert, Reinforced Design |
| Shank Dia. | 25 mm |
| Max. Cutting Dia. | 25 mm |
| Wire Rope Length | 100 mm |
| Length | 100 mm |
| Shell Material | All ISO |
| Fits Chest Size | 2 Cutting Edges per Indexable Insert, Reinforced Design |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |