Indexable Square Shoulder End Mill, Max. Cutting Dia. 25 mm, Shank Dia. 25.00 mm, Weldon Flat, Overall Length 100.00 mm, ANSI Code F4038.W25.025.Z02.30, Compatible Hardware FS1454 T8IP Clamping Screw, Coolant Fed Coolant Through
| Item | Indexable Square Shoulder End Mill |
|---|---|
| Cutter Dia. | 0.984 in |
| Series | F4038 |
| Depth of Cut | 30 mm |
| Number of Inserts | 8 |
| Cutting Edge Type | Carbide |
| Overall Length (In.) | 3.937 |
| Cutting Length | 1.181 in |
| Shank Dia. (In.) | 0.984 |
| Material | All ISO |
| Nomenclature | F4038.W25.025.Z02.30 |
| Diameter | 0.984 in |
| Left/Right Hand | Right |
| ISO Number | F4038.W25.025.Z02.30 |
| Cutting Application | Pocket Milling, Ramping, Shoulder Milling (Roughing) |
| Features | 2 Cutting Edges per Indexable Insert, Full Effective Design |
| Compatible Hardware | FS1454 T8IP Clamping Screw |
| Coolant Fed | Coolant Through |
| ANSI Code | F4038.W25.025.Z02.30 |
| Min. Cutting Dia. | 25 mm |
| Max. Speed | 38,000 rpm |
| Insert Cutting Edge Length | 30 mm |
| Shank Dia. | 25 mm |
| Shank Type - Machining | Weldon Flat |
| Head Projection Length | 50 mm |
| Overall Length | 100 mm |
| Standards | DIN1835-B |
| Number of Coolant Holes | 4 |
| Max. Cutting Dia. | 25 mm |
| Wire Rope Length | 100 mm |
| Length | 100 mm |
| Shell Material | All ISO |
| Fits Chest Size | 2 Cutting Edges per Indexable Insert, Full Effective Design |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |