Indexable Square Shoulder End Mill, Max. Cutting Dia. 32 mm, Shank Dia. 32.00 mm, Weldon Flat, Overall Length 110.00 mm, ANSI Code F4042R.W32.032.Z05.10, Compatible Hardware FS1454 T8IP Clamping Screw, Coolant Fed Coolant Through
| Item | Indexable Square Shoulder End Mill |
|---|---|
| Cutter Dia. | 1.26 in |
| Series | F4042R |
| Depth of Cut | 10 mm |
| Number of Inserts | 5 |
| Number of Inserts Required | 5 |
| Cutting Length | 0.394 in |
| Nomenclature | F4042R.W32.032.Z05.10 |
| Cutting Edge Type | Carbide |
| Shank Dia. (In.) | 1.26 |
| Left/Right Hand | Right |
| Insert Screw | FS1454 Torx 8 IP |
| Diameter | 1.26 in |
| Material | All ISO |
| Overall Length (In.) | 4.331 |
| Overall Length | 110 mm |
| ISO Number | F4042R.W32.032.Z05.10 |
| Cutting Application | Circular Interpolation Milling, Pocket Milling, Ramping, Shoulder Milling (Finishing), Shoulder Milling (Roughing) |
| Features | 2 Cutting Edges per Indexable Insert, Reinforced Design |
| Compatible Hardware | FS1454 T8IP Clamping Screw |
| Shank Type - Machining | Weldon Flat |
| Number of Coolant Holes | 2 |
| Head Projection Length | 30 mm |
| ANSI Code | F4042R.W32.032.Z05.10 |
| Coolant Fed | Coolant Through |
| Standards | DIN1835-B |
| Min. Cutting Dia. | 32 mm |
| Insert Cutting Edge Length | 10 mm |
| Max. Speed | 28,000 rpm |
| Shank Dia. | 32 mm |
| Max. Cutting Dia. | 32 mm |
| Wire Rope Length | 110 mm |
| Length | 110 mm |
| Shell Material | All ISO |
| Fits Chest Size | 2 Cutting Edges per Indexable Insert, Reinforced Design |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |