Jobber Length Drill Bit, Drill Bit Size 9.7 mm, Drill Bit Point Angle 140 Degrees , Carbide, TiSiAlCrN/AlTiN Tip, Decimal Equivalent 0.3812, Metric, Coolant Through, Number of Coolant Holes 2
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 139 mm |
| Drill Bit Size | 9.7 mm |
| Point Angle | 140 Degrees |
| Flute Length | 95 mm |
| Shank Diameter | 10 mm |
| Number of Flutes | 2 |
| Material - Machining | Carbide |
| Finish - Machining | AlTiN, TiSiAlCrN, Tip |
| Coolant Through | Yes |
| List Number | DC160 |
| Standards | TP-NORM 64 |
| Cutting Direction | Right Hand |
| Depth:Dia. Ratio | 8 xD |
| Measurement System | Metric |
| Drill Bit Point Angle | 140 deg |
| Shank Dia. | 10 mm |
| Decimal Equivalent | 0.3812 |
| Secondary Material Application | Graphite, Plastic, Stainless Steel |
| Drill Length Class | Jobber-Length |
| Drill Diameter Tolerance | M7 |
| Number of Coolant Holes | 2 |
| Material Grade - Machining | WJ30ET |
| Primary Material Application ISO Code | P, K, S, N |
| Shank Length | 40 mm |
| Coolant Fed | Coolant Through |
| Maximum Drilling Depth | 80 mm |
| Sheeter Drill | No |
| Secondary Material Application ISO Code | O, H, M |
| Primary Material Application | Cast Iron, Titanium, Brass, Bronze, Copper, Aluminum, Steel |
| Shank Type - Machining | Straight |
| Drill Point Length | 1.77 mm |
| Wire Rope Length | 139 mm |
| Length | 139 mm |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |