Jobber Length Drill Bit, Drill Bit Size 3.9 mm, Drill Bit Point Angle 140 Degrees , Carbide, TiSiAlCrN/AlTiN Tip, Decimal Equivalent 0.1535, Metric, Non-Coolant Through
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 74 mm |
| Drill Bit Size | 3.9 mm |
| Point Angle | 140 Degrees |
| Flute Length | 36 mm |
| Shank Diameter | 6 mm |
| Number of Flutes | 2 |
| Material - Machining | Carbide |
| Finish - Machining | AlTiN, TiSiAlCrN, Tip |
| Coolant Through | Non-Coolant Through |
| Depth:Dia. Ratio | 5 xD |
| Shank Dia. | 6 mm |
| Standards | DIN 6537 L |
| Cutting Direction | Right Hand |
| List Number | DC160 |
| Decimal Equivalent | 0.1535 |
| Measurement System | Metric |
| Drill Bit Point Angle | 140 deg |
| Maximum Drilling Depth | 29 mm |
| Drill Length Class | Jobber-Length |
| Material Grade - Machining | WJ30ET |
| Primary Material Application ISO Code | P, K |
| Drill Diameter Tolerance | M7 |
| Sheeter Drill | No |
| Shank Length | 36 mm |
| Primary Material Application | Cast Iron, Steel |
| Secondary Material Application ISO Code | O, H, N, S |
| Shank Type - Machining | Straight |
| Drill Point Length | 0.71 mm |
| Secondary Material Application | Brass, Bronze, Copper, Graphite, Titanium, Aluminum, Plastic |
| Coolant Fed | Non-Coolant Through |
| Wire Rope Length | 74 mm |
| Length | 74 mm |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |