Spiral Flute Tap, Thread Size 1/2 In.-20, UNF, Overall Length 100 mm, High Speed Steel, Black Oxide, Thread Length 13 mm, 75 Percent Thread Drill Size 11.40mm, Thread Limit H4/H5, Thread Direction Right Hand, Number of Flutes 4
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 3-15/16 in |
| Number of Flutes | 4 |
| Tap Material | High Speed Steel |
| Shank Dia. | 3/8 in |
| Tap Style | Spiral Flute |
| Tap Chamfer | Plug |
| Tap Size | 1/2" |
| Tap Dimension Type | Inch |
| Thread Length | 1/2 in |
| Tap Finish | Steam Oxide |
| Tap Thread Size | 1/2"-20 |
| Thread Direction | Right Hand |
| Tap Thread Type | UNF |
| Standards | DIN 2184-1 |
| Cutting Direction - Machining | Right Hand |
| Series | Paradur X·pert P |
| Secondary Material Application | Steel |
| Secondary Material Application ISO Code | P |
| Extended Neck | Yes |
| Drill Bit Size | 0.453 in |
| Threads per Inch | 20 |
| Spiral Direction | Right Hand |
| Helix Angle | 40 deg |
| Material Grade - Machining | VAP |
| 65% Thread Drill Size | 11.6 mm |
| Measurement System | Fractional Inch |
| 55% Thread Drill Size | 11.8 mm |
| Thread Limit | H4, H5 |
| 75% Thread Drill Size | 11.40mm |
| Coolant Fed | Non-Coolant Through |
| Primary Material Application ISO Code | M |
| Thread Size | 1/2"-20 |
| Shank Type - Machining | Straight |
| Thread Standard | UNF |
| Tap Shank Standard | DIN |
| Primary Material Application | Stainless Steel |
| Square Size | 7 mm |
| Shank Length | 27 mm |
| List Number | M23563 |
| Pitch Diameter Limit | 2B |
| Number of Pieces | 1 |
| Square Length | 7 mm |
| Shank Type | Straight |
| Square Width | 7 mm |
| Shank Diameter | 9 mm |
| Wire Rope Length | 100 mm |
| Length | 100 mm |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |