Spiral Point Tap, Thread Size #3-48, UNC, Overall Length 50 mm, Cobalt High Speed Steel, TiN, Right Hand, Thread Length 8 mm, 75 Percent Thread Drill Size 2.00 mm, Thread Limit H2/H3, Class of Fit JIS 2, Number of Flutes 2
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 1/8 in |
| Tap Material | High Speed Steel |
| Tap Dimension Type | Inch |
| Tap Chamfer | Taper |
| Tap Size | #3 |
| Tap Style | Spiral Point |
| Overall Length | 2 in |
| Number of Flutes | 2 |
| Tap Finish | TiN |
| Tap Thread Size | #3-48 |
| Thread Direction | Right Hand |
| Tap Thread Type | UNC |
| Thread Length | 5/16 in |
| Cutting Direction - Machining | Right Hand |
| Shank Type - Machining | Straight |
| 55% Thread Drill Size | 2.12 mm |
| Thread Size | #3-48 |
| Series | Prototex X.pert M |
| Thread Limit | H2, H3 |
| Spiral Direction | Neutral |
| Extended Neck | Yes |
| Secondary Material Application ISO Code | P |
| Class of Fit | JIS 2 |
| Drill Bit Size | 0.083 in |
| Secondary Material Application | Steel |
| 75% Thread Drill Size | 2 mm |
| Thread Standard | UNC |
| Square Size | 2.1 mm |
| Primary Material Application ISO Code | M |
| 65% Thread Drill Size | #46 |
| Measurement System | Pipe |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 37.5 mm |
| Threads per Inch | 48 |
| Primary Material Application | Stainless Steel |
| Helix Angle | 0 deg |
| Pitch Diameter Limit | 2B |
| Number of Pieces | 1 |
| List Number | M2221305 |
| Square Width | 2.1 mm |
| Square Length | 2.1 mm |
| Shank Diameter | 2.8 mm |
| Shank Type | Straight |
| Wire Rope Length | 50 mm |
| Length | 50 mm |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |